Thanks for all the replies, The spinner is now installed and I used 4
screws in the forward bulkhead.( tracked perfectly, and indexed) I did
find some information in Firewall Forward. But that said it could be
either way. After getting it all fit together it became pretty obvious
that it really needed mechanical fasteners to insure that it remains in
place.
I asked the FBO today where I could get the prop dynamical
balanced and he said that the only place local was Sensenich in Lancaster
PA. That works for me, it is a Sensenich prop and it is only a 20 min
flight in the KR. Ya Hoo some place to go.
Joe
BTW- I may have mentioned a while ago that I had the front main seal
leaking again. I had planned on replacing that when I worked on the
spinner. When I got the hub off I found that the oil was getting out thru
the bolts that hold the hub to the crank. I cleaned the bolts all up and
resealed, so we well see how it goes.
On Fri, 14 Apr 2006 09:35:41 -0400 "Myron \(Dan\) Freeman"
<mfreem...@indy.rr.com> writes:
> It needs screws.
>
> ----- Original Message -----
> From: "Joe H Horton" <joe.kr2s.buil...@juno.com>
> To: <kr...@mylist.net>; <corvaircr...@mylist.net>
> Sent: Thursday, April 13, 2006 9:19 PM
> Subject: KR> spinner
>
>
> > Guys
> > I finally got the forward bulk head for my spinner today.
> It did
> > not come with any hardware to attach it to the spinner. I thought
> that I
> > had seen extra sets of screws in some where the forward bulkhead
> would
> > be. Does it need screws here or does just having it there with a
> friction
> > fit good enough??
> > Joe Horton, Coopersburg, Pa.
> > joe.kr2s.buil...@juno.com
> >
> > _______________________________________
> > Search the KRnet Archives at
> http://www.maddyhome.com/krsrch/index.jsp
> > to UNsubscribe from KRnet, send a message to
> krnet-le...@mylist.net
> > please see other KRnet info at http://www.krnet.org/info.html
>
> _______________________________________
> Search the KRnet Archives at
> http://www.maddyhome.com/krsrch/index.jsp
> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
> please see other KRnet info at http://www.krnet.org/info.html
>
>
Joe Horton, Coopersburg, Pa.
joe.kr2s.buil...@juno.com
