I bought a big block of aluminum about six months ago with the intention to make a real nice set on my milling machine. My plan was to put in bronze sleeve bushings so they could be pushed out and replaced when they got worn. I was going to offer them as loaners like Mark's cowl mold. I have been pretty busy so I have not gotten a chance to make them yet, but if you can wait a week or two and you call and bug me on a weekend to go get them done I will gladly send them to you.
I also have a nice carbide tiped brad point drill bit for them. I got a complete set on the clearance shelf at Harbor Freight a while back and I have never seen them there again. The brad point tips do a great job going through the thin plywood on the way out without splitting the wood. I used them to drill for my landing gear attach brackets and the holes came out perfect. Brian Kraut Engineering Alternatives, Inc. www.engalt.com -----Original Message----- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On Behalf Of skp...@charter.net Sent: Tuesday, February 14, 2006 7:03 PM To: KRNET Subject: KR> Wing Attach. Drill Jig Does anyone have a wing attachment fitting drill guide fixture that they would be willing to loan out? I would gladly pay shipping both ways. I have exhausted my search here for someone to make one. HELP. If you want to talk my cel is 334-319-2845 or e-mail me off the list. -- Steven Phillabaum KR2S; 5048; corvair; Auburn, Alabama _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
