I put a string, or light cord, under my staples. Then, I pulled the string
and pulled
up one staple end. Pliers took care of the other half..
Ray Goree
----- Original Message -----
From: <jscott.pi...@juno.com>
To: <kr...@mylist.net>
Sent: Monday, July 04, 2005 6:53 PM
Subject: Re: KR> Staples
>
> Try waxing the staples with floor wax before you load them in the staple
> gun. I shot a bunch of waxed staples into the side of my KR today. I'll
> give you the results after I pull them tomorrow.
>
> Jeff Scott
> N1213W
> Los Alamos, NM
>
> On Sun, 3 Jul 2005 21:18:31 -0700 "Joe Beyer" <fly...@spiretech.com>
> writes:
>> I agree that staples are the thing to use. You've got to have a good
>> bond
>> and weights will distort and twist the structure. In the '70's
>> someone
>> mailed in an article to the news letter about a method of removing
>> staples.
>> Have a pattern drawn on the belly skin on both sides. one is the
>> glue area
>> (inside) and the outside is the staple guide. Get some plastic band
>> strap
>> material, used for fastening boxes to pallets, and tape it over the
>> staple
>> guide lines. Metal won't do. When shooting staples you go through
>> the band
>> strap and then through the skin. The next day when the glue has
>> dried just
>> pull on one end of the band strap to lift the staples. I didn't use
>> this
>> method myself because at the time I hadn't thought of it. It really
>> isn't
>> that much work to use a chisel to lift the staple up and grab it
>> with a pair
>> of pliers. I filled the indentions with plastic wood that I bought
>> at the
>> hardware store.
>
>>> Sure would be nice not to have to remove those
>>> staples.
>>
>>
>> _______________________________________
>> Search the KRnet Archives at
>> http://www.maddyhome.com/krsrch/index.jsp
>> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
>> please see other KRnet info at http://www.krnet.org/info.html
>>
>>
>
> _______________________________________
> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
> please see other KRnet info at http://www.krnet.org/info.html
