Look on my web site at www.engalt.com/kr2.htm under the engine section. Those pictures show the back dam. Those are newer pictures after I moved the cooler. Looking at the pictures I now remember that there were side baffels behind the oil cooler that ducted the air off the back of the cooler behind the engine, not through the cylinders. I still have those also and you are welcome to them. Look at the second picture down on the engine page and you will see a piece of aluminum back dam between the two engine mount bolts with the engine ground wire and oil line going through it. That is what I added when I moved the cooler.
I have one picture of the top of the engine before I moved the cooler that is not digital and I will scan it at work for you tomorrow. Brian Kraut Engineering Alternatives, Inc. www.engalt.com -----Original Message----- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On Behalf Of da...@alltel.net Sent: Tuesday, March 29, 2005 8:25 AM To: KRnet Subject: Re: RE: KR> VW Baffle Question Thanks, did you have it dammed up all across the back behind the cooler? From: "Brian Kraut" <brian.kr...@engalt.com> List-Post: krnet@list.krnet.org Date: 2005/03/29 Tue AM 07:21:06 CST To: "KRnet" <kr...@mylist.net> Subject: RE: KR> VW Baffle Question I had an air scoop in the front of the oil cooler. Some of he air went around the scoop and through the cylinders and about half of it went through the oil cooler first then down through the cyliders. I wound up moving the oil cooler to the bottom of the engine when I added the oil filter so I still have the scoop if you want it. I will send you some pictures when I get home from work. Brian Kraut Engineering Alternatives, Inc. www.engalt.com -----Original Message----- From: krnet-bounces+brian.kraut=engalt....@mylist.net [mailto:krnet-bounces+brian.kraut=engalt....@mylist.net]On Behalf Of Dan Heath Sent: Monday, March 28, 2005 7:45 PM To: kr...@mylist.net Subject: KR> VW Baffle Question The GPASC templates seem to call for the entire back to be dammed up. What did you do, if anything, to provide for air flow through your oil cooler? See you in Mt. Vernon - 2005 - KR Gathering See N64KR at http://KR-Builder.org - Then click on the pics There is a time for building and a time for FLYING and the time for building has expired. Daniel R. Heath - Columbia, SC _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
