Add alcohhol, 10 to 15% when the mix micro-epoxi is ready. You can re use alcohol again if necessary.
----- Original Message ----- From: "Brian Kraut" <brian.kr...@engalt.com> To: "KRnet" <kr...@mylist.net> Sent: Sunday, November 28, 2004 1:56 AM Subject: RE: KR> faster filler >I was thinking of that since I make a very thick micro now then thin it > enough to spread easily, but I have been noticing that if you use too much > alcohol the micro seems to separate out of the epoxy. > > Brian Kraut > Engineering Alternatives, Inc. > www.engalt.com > > -----Original Message----- > From: krnet-bounces+brian.kraut=engalt....@mylist.net > [mailto:krnet-bounces+brian.kraut=engalt....@mylist.net]On Behalf Of > Phillip Matheson > Sent: Saturday, November 27, 2004 11:14 PM > To: KRnet > Subject: Re: KR> faster filler > > > plenty of faster drying epoxies but all the ones I know of are a lot > thicker > than the slow laminating epoxies. > ------------------- > Brian > > Thin the thicker epoxy with alcohol ( We call Mentholated Spirits) then > add > your micro, the alco should evaporate , Try a small amount first > > Phil Matheson > mathe...@dodo.com.au > Australia > 61 3 58833588 > Kr Construction Web page > http://mywebpage.netscape.com/Flyingkrphil/VHPKR.html > See our VW Engines and home built Parts > and Kits at: > http://www.vw-engines.com/ > www.homebuilt-aviation.com > > > > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > > please see other KRnet info at http://www.krnet.org/info.html > > > > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > > please see other KRnet info at http://www.krnet.org/info.html > --- > [This E-mail scanned for viruses by Declude Virus] > > --- [This E-mail scanned for viruses by Declude Virus]
