Sorry had to change the subject for correct listing in archive this is same question. > > From: Steven Phillabaum <skp...@charter.net> > Date: 2004/11/16 Tue AM 12:32:52 GMT > To: <kr...@mylist.net> > Subject: KR> Rob end bearing help > > I have a dilemma. The rod end bearing assym. I am using for my elevator > hinges are taking up a space of 1.5 inches without the washers. Dr. Dean's > drawing shows washers adding about 1/8 inch. The space between the elevator > spar and the rear spar of the horizontal stab. is 1.5 inches. > How do I accomodate the extra needed space? I want to build the entire > horizontal stab and elevator at one glass up with the hinges installed. Then > cut out the elevator and finish the trailing and leading edges respectfully. > I looked on the archive and found nothing about this problem. Sorry but I do > remember some talk of this problem somewhere but can't find it. MAN I GOT TO > GET THIS GOING. > > Steven Phillabaum > Auburn Alabama > > > _______________________________________ > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html >
