Yes, tThey will be bolted to the center spars when I build the second set of wings. That is the reason for protecting the wing stubs with peel ply or waxed paper.
Gene Leone, Worland, Wyoming. -------Original Message------- From: JAMES FERRIS List-Post: krnet@list.krnet.org Date: 10/29/04 12:17:24 To: kr...@mylist.net Subject: Re: KR> kr wing sets Are you building the outboard panels attached to the center or building them separate, detached from the center section? Thanks Jim On Fri, 20 Feb 2004 05:38:40 -0700 (Mountain Standard Time) "gleone" <gle...@rtconnect.net> writes: > Don, > > It's really simple. Using wax paper (or peel ply), cover the stubs > and tape > in place using gorilla tape or waxed paper. Then, build your outer > wings as > normal. Once the fiberglass work is done, cut as per plans. The > peel ply > or waxed paper will protect the stub from any "splash over". If > you're > concerned about the WAF's being dripped on by the resin, cover the > exposed > part liberally with Johnson's Turtle Wax. I'm building the KR-1 > /-1B. > Right now I'm building the -1 wings but come spring, I'll be > building the > -1B wings. And in both cases, I'm using the 5046 airfoil. Enjoy! > > Gene Leone, Worland, Wyoming > > > -------Original Message------- > > From: Don Chisholm > Date: 10/29/04 04:53:59 > To: gle...@rtconnect.net > Subject: KR> kr wing sets > > has anyone figured how to build wing sets separately > _______________________________________ > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > > _______________________________________ > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > > _______________________________________ to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
