Are you building the outboard panels attached to the center or building
them separate, detached from the center section?
Thanks
Jim
On Fri, 20 Feb 2004 05:38:40 -0700 (Mountain Standard Time) "gleone"
<gle...@rtconnect.net> writes:
> Don,
>
> It's really simple. Using wax paper (or peel ply), cover the stubs
> and tape
> in place using gorilla tape or waxed paper. Then, build your outer
> wings as
> normal. Once the fiberglass work is done, cut as per plans. The
> peel ply
> or waxed paper will protect the stub from any "splash over". If
> you're
> concerned about the WAF's being dripped on by the resin, cover the
> exposed
> part liberally with Johnson's Turtle Wax. I'm building the KR-1
> /-1B.
> Right now I'm building the -1 wings but come spring, I'll be
> building the
> -1B wings. And in both cases, I'm using the 5046 airfoil. Enjoy!
>
> Gene Leone, Worland, Wyoming
>
>
> -------Original Message-------
>
> From: Don Chisholm
> Date: 10/29/04 04:53:59
> To: gle...@rtconnect.net
> Subject: KR> kr wing sets
>
> has anyone figured how to build wing sets separately
> _______________________________________
> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
> please see other KRnet info at http://www.krnet.org/info.html
>
> _______________________________________
> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
> please see other KRnet info at http://www.krnet.org/info.html
>
>
