Phillip, In my blue construction manual, Page 98 there is a drawing of an engine mount with dimensions. I have two engine mounts for my project and neither one of them are the same dimensions as what is in the book. The one illustrated in the manual measures; top horizontal width = 7 3/4" bottom horizontal width = 8 1/4", the vertical distance is 8 3/4". The great plains engine mount I have, which bolts up to the Diehl accessory case is rectangular, 9 1/2" horizontal and 11" vertical. the other mount I have is narrow at the top and wider at the bottom, width at top is 6 3/4", width at bottom 10 1/2" ; the vertical distance is approximately 11 3/8". Both of the engine mounts I have use the same bolt pattern through the firewall. I believe this last one is a HAPI mount. Hope this helps a little. Bud Midkiff Lynnwood, WA KR2Streched email: c.midk...@verizon.net web: http://mysite.verizon.net/res18ums/index.html
Ps. John, I too would be interested in any kind of get together of KR builders in the west! ----- Original Message ----- From: "Phillip Matheson" <mathe...@dodo.com.au> Subject: Re: KR> HAPI Engine Mount Can someone explain the difference between the different mounts, or are there any engine mount photo's around to what a Hapi is?? My mount is off ?? Revmaster engine ?? Phillip Matheson
