As the song says, "There, I've Done it Again". Sorry for the repetition. It
is good to have your confirmation and Dan's output. I hae called him several
times.
Ray Goree
----- Original Message -----
From: "Dan Heath" <da...@alltel.net>
To: <kr...@mylist.net>
Sent: Sunday, June 20, 2004 5:08 AM
Subject: KR> RE: Dan Diehl says that epoxy other than Vinylester can be used
> Ray,
>
> I just had some discussion with Dan on that very subject. He says to sand
> until you get the gummy stuff off the top and your sanding is bringing up
> white powder. I may start on it with a 40 grit and then go to 100. He
also
> says that VinylEster is not the best for gluing to wood and recommend
using
> something different. We are using Aero Poxy and he suggested that I stick
> with that. I am sure that West or any of the structural resins are good.
>
> Unless you have premolded skins, or used VinylEster to make the wings, it
> won't matter anyway.
>
> If Dan Diehl says it, that is all the confirmation that you really need.
>
> See N64KR at http://KR-Builder.org - Then click on the pics
>
> "There is a time for building and a time for flying, and the time for
> building has long since expired."
>
> Daniel R. Heath - Columbia, SC
>
> See you in Mt. Vernon - 2004 - KR Gathering
>
> See our EAA Chapter 242 at http://EAA242.org
>
> _______________________________________
> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
> please see other KRnet info at http://www.krnet.org/info.html
