I have one set of RR wing attach fittings for sale for a 2S. I understand that they are the same as for a 2 except for the four small aft outboard fittings because the spar is not bent back. I may be wrong on this, but I am pretty sure that is correct. If you do need to change the few different ones Jeanette does have the small WAFs in stock.
Price is $375 for the set including shipping in the U.S. I realize that is no great savings, but I have them now. I also have a set of Diehl gear for sale. The set consists of the upper casting, the gear leg, the lower brackets, and the bolt kit. As when you buy the set from Dan, it does not include the axles. The legs are already glassed and hae the straw for the brake line already done. The glass work is very good and will require very little finishing. The set is for a tail dragger, but I think they are the same as for a nose wheel, just mounted on the other side of the spar. Not 100% sure on this, but someone on the list should know. The legs are not drilled yet and the holes to mount the leg to the upper casting are not drilled in the casting yet, so there is no worry that there is any misalignment on this set. Dan sells the set for $525 plus $15 for shipping. I will sell them for $500 with shipping in the U.S. included. The work that is done will save about three hours. I am selling the gear because I have ordered new leg blanks that will not rake as far forward and I am welding up new brackets for more prop clearance. I also have the forward spar to sell. The spar is drilled to match this gear set. I am fairly sure I can get the center section spar off the plane without damage, but I am not sure on this yet. Reply direct to me at br...@engalt.com or call my cell at 904-536-1780. Brian Kraut Engineering Alternatives, Inc. www.engalt.com
