Colin this is not a carb, it has no float. It mixes the gas immediately with out storing it in a fuel bowl, the needle is adjusted mechanically via the sliding guillatine. Because of it's simplicity I feel it is superior to a run of the mill carb. I did have some problems with getting the correct mixture set but now I would never consider getting rid of it.---------------Kenny
On Mon, 1 Dec 2003 19:43:56 -0500 "Colin" <crain...@cfl.rr.com> writes: > Not to sound antagonistic, but any carb that only requires more than > .5 psi to hold the needle off its seat is in my book a bad carb. > All the automotive carbs I have ever dealt with can stand anywhere > from 3 to 7 psi without flooding, provided the needle and seat is in > good condition. Most mechanical pump will make 3 to 5 psi in stock > form. Being able to run at .5 psi, and maxing out at .5 psi are 2 > different things. I think that if I had a carb that I knew could > not withstand more than 1 psi, I would junk it and find another one. > Just my opinion. I may find this Zenith ends up the same way and I > go looking also... > > Colin & Bev Rainey KR2(td) > crain...@cfl.rr.com > http://kr-builder.org/Colin/index.html > Sanford, Florida > KR Gathering 2004-see ya in Mt > Vernon_______________________________________________ > see KRnet list details at http://www.krnet.org/instructions.html > > ________________________________________________________________ The best thing to hit the internet in years - Juno SpeedBand! Surf the web up to FIVE TIMES FASTER! Only $14.95/ month - visit www.juno.com to sign up today!
