Mark, The pop rivets would hold the steel and hinge together quite well, but I would not count on them holding the assembly to the wooden bulkhead. My vote is for the SCREWs......!!!
Keep on keepng on, KRJerry Jerry Mahurin Lugoff, SC e-mail: krje...@bellsouth.net Website: http://KR-Builder.org -------Original Message------- From: KR builders and pilots List-Post: krnet@list.krnet.org Date: Wednesday, October 15, 2003 22:25:24 To: KR builders and pilots Subject: Re: KR>Piano hinge for Cowl My thoughts were piano hinge on top of stainless steel firewall on top of plywood. The pop rivet would go through the piano hinge, through the SS firewall then into the plywood firewall. If this is an incorrect way, I will use #4 x 3/4" wood screws. Thoughts..... Mark Jones (N886MJ) Wales, WI USA E-mail me at flyk...@wi.rr.com Visit my KR-2S CorvAIRCRAFT web site at http://mywebpage.netscape.com/n886mj/homepage.html ----- Original Message ----- From: "KRJerry" <krje...@bellsouth.net> .. But if you are talking about pop riveting metal to wood....FORGET IT....!!! _______________________________________________ see KRnet list details at http://www.krnet.org/instructions.html .
