I'd cut the existing verticle post off flush with the fusalage and build a new post from scatch. Then laminate it in front of the cut off old post. I can't see that moving the verticle stab forward 3\4 inch would affect much. It's also much easier to tapper the post before it is mounted.
Rick Hubka r...@hubka.com http://www.hubka.com Calgary Alberta Canada -----Original Message----- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On Behalf Of kr2sn50...@aol.com Sent: Friday, September 26, 2003 12:44 AM To: kr...@mylist.net Subject: KR>New Airfoil Has anyone built the new airfoil on vertical yet. I have already glued in my tail post and its tapered down to the .500 in that the original plans called for. The new airfoil calls for the vertical at the tip to be .760 at the fwd spar and .850 at the aft spar. The only idea I have come up with to correct this is to laminate a piece on each side of the vertical post aprox .166 to each side and the try to re-taper. Any one have a better idea? Otherwise it looks like I might the new airfoil on everything but the vertical. Chris Theroux Gilbert, Az _______________________________________________ see KRnet list details at http://www.krnet.org/instructions.html
