The regulator is privately labeled for Purolator, NAPA, Spectre and others. They are all the same. Mine happens to be a Spectre part #2517 bout at a local auto parts house (Auto Zone). It can be easily set from 1/2 PSI to 6 PSI in 1/2 PSI increments. The finish is chrome and it is about 2" diameter x 1.5" height. Accepts up to a 3/8" line. Now, avoid the Purolator and NAPA brand made during Nov 2001 through August 2002 as there was a recall due to the diaphragm not being fuel compatible. Here is the recall alert link: http://www.safetyalerts.com/recall/a/02/v00400.htm
Mark Jones (N886MJ) Wales, WI USA E-mail me at flyk...@wi.rr.com Visit my KR-2S CorvAIRCRAFT web site at http://mywebpage.netscape.com/n886mj/homepage.html ----- Original Message ----- From: "larry severson" <lar...@socal.rr.com> To: "KR builders and pilots" <kr...@mylist.net> Sent: Monday, September 15, 2003 6:40 PM Subject: Re: KR>Fuel Pressure Regulator > > >Since I am using wing tanks and the Corvair mechanical fuel pump puts > > out 6 PSI, I must regulate the pressure down to 1 PSI or less for the > > Aerocarb. > > Where did you get the regulator? > > Larry Severson > Fountain Valley, CA 92708 > (714) 968-9852 > lar...@socal.rr.com > > > _______________________________________________ > see KRnet list details at http://www.krnet.org/instructions.html >
