Look at how the Cozy IV is made, wood is almost nill. ----- Original Message ----- From: "Justin" <jmw...@socal.rr.com> To: "KR builders and pilots" <kr...@mylist.net> Sent: Friday, July 11, 2003 10:41 AM Subject: Re: KR>My KR2S
> As you might not know is that im not using typical plywood skins. I will be > using fiberglass skins in a sandwhich form meaning im putting foam inbetween > the wood. I will varnish the entire airplane but only one coat on the > outsides that is sanded. Remember the fiberglass will bond to the foam > extremly well and the wood but say my wood isnt correct in some place, I > will fill the gap using flox which is stronger than the wood. > > Sound like it would work to you guys? > > Justin > ----- Original Message ----- > From: "Mark Jones" <flyk...@wi.rr.com> > To: "KR builders and pilots" <kr...@mylist.net> > Sent: Friday, July 11, 2003 6:18 AM > Subject: Re: KR>My KR2S > > > > Justin. > > In the photo of your boat you state you are varnishing the wood. Do not > > varnish it until you have skinned it, and completed the plywood gussets > > around the main spar, added your rear bulkhead, etc. If you do, you will > not > > get a good bond between the frame and skins. You are going to have to do a > > lot of sanding to get back to bare wood to skin the frame. > > > > Mark Jones (N886MJ) > > Wales, WI USA > > E-mail me at flyk...@wi.rr.com > > Visit my KR-2S CorvAIRCRAFT web site at > > http://mywebpage.netscape.com/n886mj/homepage.html > > > > > > ----- Original Message ----- > > From: "Justin" <jmw...@socal.rr.com> > > To: "KR builders and pilots" <kr...@mylist.net> > > Sent: Friday, July 11, 2003 12:46 AM > > Subject: Re: KR>My KR2S > > > > > > > http://www.geocities.com/attngrabber14/kr2s.html > > > > > > Forgot the link > > > ----- Original Message ----- > > > From: "Justin" <jmw...@socal.rr.com> > > > To: <kr...@mylist.net> > > > Sent: Friday, July 11, 2003 12:46 AM > > > Subject: KR>My KR2S > > > > > > > > > Here is a link to my website. I just bought a digital camera and took a > > few > > > pictures of my project with it. I had a bad experience with a normal > > camera, > > > the film place LOST my film which included all of my construction > photo's > > on > > > it so this digital camera will prevent that. > > > > > > Justin > > > _______________________________________________ > > > see KRnet list details at http://www.krnet.org/instructions.html > > > > > > > > > > > > _______________________________________________ > > > see KRnet list details at http://www.krnet.org/instructions.html > > > > > > > > _______________________________________________ > > see KRnet list details at http://www.krnet.org/instructions.html > > > > > _______________________________________________ > see KRnet list details at http://www.krnet.org/instructions.html >
