Justin. In the photo of your boat you state you are varnishing the wood. Do not varnish it until you have skinned it, and completed the plywood gussets around the main spar, added your rear bulkhead, etc. If you do, you will not get a good bond between the frame and skins. You are going to have to do a lot of sanding to get back to bare wood to skin the frame.
Mark Jones (N886MJ) Wales, WI USA E-mail me at flyk...@wi.rr.com Visit my KR-2S CorvAIRCRAFT web site at http://mywebpage.netscape.com/n886mj/homepage.html ----- Original Message ----- From: "Justin" <jmw...@socal.rr.com> To: "KR builders and pilots" <kr...@mylist.net> Sent: Friday, July 11, 2003 12:46 AM Subject: Re: KR>My KR2S > http://www.geocities.com/attngrabber14/kr2s.html > > Forgot the link > ----- Original Message ----- > From: "Justin" <jmw...@socal.rr.com> > To: <kr...@mylist.net> > Sent: Friday, July 11, 2003 12:46 AM > Subject: KR>My KR2S > > > Here is a link to my website. I just bought a digital camera and took a few > pictures of my project with it. I had a bad experience with a normal camera, > the film place LOST my film which included all of my construction photo's on > it so this digital camera will prevent that. > > Justin > _______________________________________________ > see KRnet list details at http://www.krnet.org/instructions.html > > > > _______________________________________________ > see KRnet list details at http://www.krnet.org/instructions.html
