You are making it too hard. Just weld a standard 3/8" Hex nut to a small steel plate, drill several holes in the plate, drill a 3/8" hole in the lower main spar at the desired location, push a waxed 3/8" eye bolt into the hole and screw into the "Hex nut" , epoxy with flox the "Hex nut and plate in place. After the epoxy dries, remove the eye bolt and reinsert whenever you want.
----- Original Message ----- From: "Jim Morehead" <kr...@d-web.com> To: "KR- Net" <kr...@mylist.net> Sent: Sunday, July 06, 2003 11:31 PM Subject: KR>Tie Down Attach Points > Netters, > > What kind of tie down attach fittings are you all using using on the wings? > I have been trying to come up with a flush pull down or swing out ring to > attach a tie down rope. > > Thanks, > Jim Morehead > Cameron Park, CA > Cut out the Ailerons, glassed in the aileron spars and attached aileron > counter balance. > Looking forward to Red Oak. > > > _______________________________________________ > see KRnet list details at http://www.krnet.org/instructions.html > >
