Dana, I do enjoy seeing your project going together. In fact, I envy you every time I am out there in all that sanding dust and wearing that mask to keep out the epoxy fumes, which seem to get in anyway.
Now you can get a tall bar stool and sit up there and make airplane noises. N64KR Daniel R. Heath - Columbia, SC da...@kr-builder.org See you in Red Oak - 2003 See our KR at http://KR-Builder.org - Click on the pic See our EAA Chapter 242 at http://EAA242.org -------Original Message------- From: KR builders and pilots List-Post: krnet@list.krnet.org Date: Friday, July 04, 2003 4:50:40 PM To: kr...@mylist.net Subject: KR>More Fun Friday!! Since it's still Friday and I was able to finish what I wanted to on my airplane today, here is todays progress. I finished dimpling, countersinking and deburring the firewall last night. I had to prime and rivet it today but only after I finally inventoried the fuselage kit........whick took 3.5 hours!! Anyway, the firewall is done with flush rivets on the forward side, made for a clean firewall. In this pic you can see in the lower left the brake line pass through. In the lower right center corner of the firewall is a backing plate, with nutplates forward, for mounting of the electrical fuel pump. The center section comes with the wing, as it is match drilled to the spars at a mate. I was able to finish riveting on nutplates, brackets and uprights today and couldn't resist bolting on the control stick assembly.........that is in the plans at this point, it is just a little furthur than I had planned on making it today. http://rvflying.tripod.com/fuselage6.jpg It isn't KR, just thinking you guys and gal might enjoy seeing how another airplane goes together. Happy 4th.!! Dana Overall 1999 & 2000 National KR Gathering host Richmond, KY RV-7 slider/fuselage http://rvflying.tripod.com do not archive _________________________________________________________________ MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*. http://join.msn.com/?page=features/virus _______________________________________________ see KRnet list details at http://www.krnet.org/instructions.html .
