I Too would like a photo,if it's not to much trouble? Thanks Tim Bellville KR2 N7038V ----- Original Message ----- From: "William Clapp" <clapps...@cybersouth.com> To: "KR builders and pilots" <kr...@mylist.net> Sent: Tuesday, June 17, 2003 6:42 PM Subject: Re: KR>Diehl gear
> Since I had fiberglass legs arready but did not have brackets, I went ahead > and made mine out of 1/4" steel. I followed the basic design of Deihl. > After welding them I put a couple lightening holes in them. I believe they > weigh a little less than a pound each finished. They are strong. The > aluminum ones may weigh close to the same since they are thicker. They have > NOT been flight tested yet but seem a little overbuilt for the plane. Just > what I want. I can sent you photos if you want. Bill > ----- Original Message ----- > From: <skp...@charter.net> > To: <kr...@mylist.net> > Sent: Tuesday, June 17, 2003 6:14 PM > Subject: KR>Diehl gear > > > > Question. > > I looked in the archieve list and could not find a certian > > posting about someone who made their own gear bracket like > > a Diehl. Since I'm cheap, could this safely work? and > > could I talk with them? Decided to go with the tail > > dragger for weight reduction. > > > > Steven Phillabaum > > Auburn Alabama > > > > _______________________________________________ > > see KRnet list details at http://www.krnet.org/instructions.html > > > > > > _______________________________________________ > see KRnet list details at http://www.krnet.org/instructions.html
