I also have the RevFlow. I don't have the same issues you have. I idle at 800 rpm, no leaning is required to 3000 ft. When the temps drop outside be sure to use carb heat, these things will ice up, then you bend the spring inside. When that happens the carb
stays at almost full power and you gotta kill the mill to land. On Tue, 10 Jun 2003 19:20:32 EDT flymaca711...@aol.com writes: > now that it stop raining! here in the east its back to more testing. > my revflow is a dream so far but IM having teething problems with it > > i changed my lines to 3/8 it became rich on take off i readjusted it > less > then 1/2 turn > and its OK again. my question is that after take off i have to > start leaning > it or it gets rough is this normal and you just have to get use to > how to > operate it. > After all if you get it to lean its going to quit. I think you just > got to > learn how to use it > idle its the same as my zenith 1000 1200 rpms some say that's to > high but > thats what mine and all that I have seen idle at. > > Billy mcfarland > flymaca711...@aol.com > flying kr2 > _______________________________________________ > see KRnet list details at http://www.krnet.org/instructions.html > > ________________________________________________________________ The best thing to hit the internet in years - Juno SpeedBand! Surf the web up to FIVE TIMES FASTER! Only $14.95/ month - visit www.juno.com to sign up today!
