ace nunye wrote: >> If the elevator cable terminates at the forward end on a bellcrank, seems >> like the tension issue is settled, now the bias , there should be a way to >> isolate the fore n aft stick inputs from the side to side movements between >> stick n (forward elevator bellcrank), this would fix the bias issue, I >> mean all we are after is to isolate the two inputs from one another. Right >> ?<<
Well, my point was if you build it by the plans (and everybody knows how important that is to me), you'll make the STICK the termination (and pivot) point for the elevator cables. Kind of hard to isolate the two when four cables are connected directly to the bottom of the stick. As for the solution, theres one of 'em at http://home.hiwaay.net/~langford/kcontrol.html#update , and there are lots of others. Rigging a stick to work properly was solved about 80 years ago, about the same time the KR's airfoil was designed... Mark Langford, Huntsville, AL N56ML at hiwaay.net see KR2S project N56ML at http://home.hiwaay.net/~langford e-mail virus protection service: 2 months FREE* -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mylist.net/private/krnet/attachments/20030529/08008eb3/attachment.htm
