With extensive mods all bets are off.Good luck.Both options are good.Tommy W
On Wed, Aug 31, 2016 at 9:11 PM, Global Solutions via KRnet < krnet at list.krnet.org> wrote: > Hi Folks > I was looking in to the landing gear for a Kr2S. The boat is going to be > 6" wider then the stock plans. > I was looking at the NVaero site and they have the castings for the Deli > gear which because they have no picture I am guessing I would still need to > make the actual legs. they also do not specify if the castings they sell > are priced each or for the pair. > I then came across this which is made from Material: 7075-T6 Aluminum > KR2 One Piece Landing Gear > The airport I have access to for the moment is a grass strip and I was > thinking the aluminum may act as a bit of a shock suppressor and may be > lighter then the wood/glass that others have used. > Would I be ahead to bend something like this in the press brake or go the > Deli Gear route? > > Also I was thinking of going with MATCO brakes as per NVAERO or am I > better off with Cleveland or some other brand. I also noted on Mark > Landfords site that he played with wheel sizes. What is the overall > consences with respect to tire size? > > Thanks > Stan > > > > _______________________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options >
