hi gary, I'd like to know the measurements widest point where pilot sits, overall length. lot of these seem to have been modded bigger and I am tryin to stay original as possible... how much are you asking for the boat section? thank you regards,chris
> Date: Sun, 15 May 2016 13:11:21 +0000 > To: krnet at list.krnet.org > Subject: Re: KR> what to look for when inspecting/buying a KR project > From: krnet at list.krnet.org > CC: gr49 at comcast.net > > I have a KR-1 Boat hanging in my shop if your interested ? > > Building a KR-1.5 SS (super stretched) myself. > > Also a VW engine mount an other things. > > > > Gary Robison > gr49 at comcast.net > 724-45nine-eight nine four 1 > > > Subject: Re: KR> what to look for when inspecting/buying a KR project > > I do appreciate the replies. just to be clear what I'm after, I am ONLY > interested in a KR1 single place, original style, less than 50% built. I know > a lot of discussion takes place here and its easy to forget who is into what, > but I have been talking about replicating Ken's original KR1 all along, > except for some sensible improvements to enhance reliability/safety. And it > will be tri-geared. To that goal, I have purchased a set of new KR1 plans. > If I can find a stock KR1 boat stage that would fantastic and they do > occasionally come up. > My question was what to look for in terms of construction detail that may > indicate a poor build, especially indications that the woodwork cannot be > used. > > > _______________________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options
