Chad, Yes I do remember doing a laminate, but I can't remember whether it was horizontal or vertical. Either one will work for the design, no issues.
Rob Schmitt N1852Z Sent from my iPad > On Apr 11, 2016, at 10:15 AM, Chad Hustad via KRnet <krnet at list.krnet.org> > wrote: > > I apologize in advance if this information is in here somewhere but I have > searched and was unable to find it.The spruce sent to me for the forward > center spar caps per the kr2s cut list is 2"x 1 1/4". To be laminated to > make a cap that is 2" thick and 2 5/32" wide per the plans. The only way I > see to get these dimensions is to have a vertical laminate joint. What Ive > seen from everyone else on their build logs is horizontal joints. My question > then is, what has everyone else done here? > _______________________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options
