The WAFs are properly aligned with the spar on both sides. Also, everything is already glassed.
Much easier to keep the spar hole pattern unchanged, vs cut up and redo the stub wings in order to redrill the spars. On Jan 27, 2016 1:08 AM, "Phillip Matheson via KRnet" <krnet at list.krnet.org> wrote: > Am I missing something here. > Why not remove one of the WAF from the top or bottom. Fill the spar holes. > Bolt the spar to the other fixed WAF. Set up the spar correctly. Then re- > drill the spar. PHIL. Matheson > > Sent from my iPhone > > > > >> > >> > >> > >> > >> > >> > >> > >> _______________________________________________ > >> > >> _______________________________________________ > >> Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > >> To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > >> please see other KRnet info at http://www.krnet.org/info.html > >> see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to > change > >> options > > _______________________________________________ > > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > > please see other KRnet info at http://www.krnet.org/info.html > > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to > change options > > _______________________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options >
