I used the "lawn mower" push pull cables on my throttle using the "wire grips" (see below) and they work great. You can attach a rod end bearing or a fork on the ends. I used 4 in my throttle run, throttle handle, carb, and two at the reversing arm. My left mounted throttle assembly (see panel photo below) is a dual lever assembly with friction lock and one handle removed, the long handle shortened, and a section of mop handle added as a hand hold, P51 style. Works great. Zoom in on the carb photo to see wire grip, rod end bearing, and wood washer to prevent a disconnect in case of bearing failure. The red knob on the panel is the locking mixture control and the black knob is carb heat.
Larry Flesner ++++++++++++++++++++++++++ wire grips http://www.aircraftspruce.com/catalog/appages/wiregrip.php?clickkey=31630 panel https://dl.dropboxusercontent.com/u/32133949/IMG_8717.JPG carb https://dl.dropboxusercontent.com/u/32133949/IMG_8083.jpg
