thanks I will get enough to get it done , then I will mix up some flox and epoxy and add it about 1 in on the outside of it then secure with screws when I install the flange to attach the cowl to
-----Original Message----- From: Flesner via KRnet <krnet at list.krnet.org> To: KRnet <krnet at list.krnet.org> Sent: Sun, Nov 23, 2014 6:27 pm Subject: Re: KR> firewall >I cut the stainless for my firewall to day. do I need to epoxy it to >the plane or just screw it in place? >Randy Moore +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ You will want to put a layer of "fiberfrax" over the ply for fire protection before applying the stainless. A bit of epoxy, especially around the edges, help to dress up the firewall and keep oil and other contaminates from getting behind the stainless. http://aircraftproducts.wicksaircraft.com/keyword/?&plpver=10&key=all&keycateg=100&SchType=2&keyword=fiber%20frax&refer=http://aircraftproducts.wicksaircraft.com Larry Flesner _______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options
