> Should I cut the trim tab out square with the spar? Or square with > the trailing edge? and whatever I decide I know my ray allen trim > tabs servo would have to be square to the tab.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Do you prefer blonds or brunets? Same deal, it will work either way. I went parallel to the trail edge but parallel to the spar would allow better alignment with air stream of the linkage. https://dl.dropboxusercontent.com/u/32133949/IMG_8611.JPG https://dl.dropboxusercontent.com/u/32133949/IMG_8612.JPG https://dl.dropboxusercontent.com/u/32133949/IMG_8613.JPG https://dl.dropboxusercontent.com/u/32133949/IMG_8615.JPG If things aren't quite square you can bend the pushrod a bit or put a slight twist in the bellcrank arm but square is always good. Larry Flesner
