Dan, I used Aeropoxy with both fiberglass and carbon fiber layups and it wets out easily now matter which type of cloth I was using. There's very little odor and using acetone to clean brushes it stops the cure in the brushes right away so I can use the brushes again. I would highly recommend the Aeropoxy. Others may have different results using other systems.
Neal Hornung (lt1corvette at earthlink.net) -----Original Message----- >From: Dan Prichard <dprich01 at comcast.net> >Sent: Oct 30, 2013 12:18 AM >To: KR List <krnet at list.krnet.org> >Subject: KR> Epoxy > >T-88 appears to be the structural adhesive of choice but what about lay up >resins. System 3, west, aeropoxy or what? I can use a little help from >experience. Also I asked about Okome plywood usage. No responses. > >Sent from my iPhone >_______________________________________________ >Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. >To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org >please see other KRnet info at http://www.krnet.org/info.html >see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change >options
