Second attempt at a reply. You can't be that precise with paper templates anyway. I was about to cut out a rib and noticed that my rib template was short by 1/8 inch. I thought that kinkos' printer had scaled it...I went through a bunch of file manipulation to make a dxf file and such...then thought i would check the one that was already glued to a rib and it was nuts on...the paper shrank 0.3%. The only way to avoid that is to print on something dimensionally stable like mylar.
On 5/28/13, Phillip Hill <phill.hill at gmail.com> wrote: > Ok, this is probably a silly question, but when faced with cutting out an > airfoil profile, like the ones in our KR plans, do you cut outside the > line, inside the line or right down the middle? The line is so thick, > where you cut it, makes a difference. > > Phill Hill > Collinsville, IL > _______________________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options >
