Hi,
i am seeing a lot of these messages in the chassisd log:
Sep 18 10:44:25 PEM power status has changed, run power budget again
Sep 18 10:44:28 PEM power status has changed, run power budget again
Sep 18 10:44:44 PEM power status has changed, run power budget again
Sep 18 10:44:47 PEM power status has changed, run power budget again
Sep 18 10:45:22 PEM power status has changed, run power budget again
Sep 18 10:45:28 PEM power status has changed, run power budget again
I already updated from 17.4R1 to R2 but it's still there. There is no alarm
active and both PS look normal but the voltage on PEM 0 is "only" 11V, maybe
there's a problem?
PEM 0 status:
State Online
Airflow Front to Back
Temperature OK 48 degrees C / 118 degrees F
Temperature OK 49 degrees C / 120 degrees F
Fan Sensor 6660 RPM
DC Output Voltage(V) Current(A) Power(W) Load(%)
11.00 7 77 11
PEM 1 status:
State Online
Airflow Front to Back
Temperature OK 47 degrees C / 116 degrees F
Temperature OK 49 degrees C / 120 degrees F
Fan Sensor 6570 RPM
DC Output Voltage(V) Current(A) Power(W) Load(%)
12.00 8 96 14
Anyone else having this problem?
Kind regards.
Joerg
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
