Hi Lorenzo,
>On Thu, Jan 19, 2017 at 08:35:54PM +0530, Sricharan R wrote:
>> With all the DT based devices getting their dma ops configured
>> during probe time to have the right iommu setup, let us do the
>> same for acpi based devices as well.
>>
>> Configuring DMA ops at probe time will allow deferring device probe when
>> the IOMMU isn't available yet. The dma_configure for the device is
>> now called from the generic device_attach callback just before the
>> bus/driver probe is called. This way, configuring the DMA ops for the
>> device would be called at the same place for all bus_types, hence the
>> deferred probing mechanism should work for all buses as well.
>>
>> Signed-off-by: Sricharan R <sricha...@codeaurora.org>
>> ---
>> * Removed the dma configuration for the pci devices in case of ACPI
>> from pci_dma_configure which was hanging outside separately and
>> doing it in dma_configure function itself.
>>
>> drivers/acpi/glue.c | 5 -----
>> drivers/base/dma-mapping.c | 13 ++++++++++++-
>> drivers/pci/probe.c | 25 -------------------------
>> 3 files changed, 12 insertions(+), 31 deletions(-)
>>
>> diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c
>> index fb19e1c..c05f241 100644
>> --- a/drivers/acpi/glue.c
>> +++ b/drivers/acpi/glue.c
>> @@ -176,7 +176,6 @@ int acpi_bind_one(struct device *dev, struct acpi_device
>> *acpi_dev)
>> struct list_head *physnode_list;
>> unsigned int node_id;
>> int retval = -EINVAL;
>> - enum dev_dma_attr attr;
>>
>> if (has_acpi_companion(dev)) {
>> if (acpi_dev) {
>> @@ -233,10 +232,6 @@ int acpi_bind_one(struct device *dev, struct
>> acpi_device *acpi_dev)
>> if (!has_acpi_companion(dev))
>> ACPI_COMPANION_SET(dev, acpi_dev);
>>
>> - attr = acpi_get_dma_attr(acpi_dev);
>> - if (attr != DEV_DMA_NOT_SUPPORTED)
>> - acpi_dma_configure(dev, attr);
>> -
>> acpi_physnode_link_name(physical_node_name, node_id);
>> retval = sysfs_create_link(&acpi_dev->dev.kobj, &dev->kobj,
>> physical_node_name);
>> diff --git a/drivers/base/dma-mapping.c b/drivers/base/dma-mapping.c
>> index f82212c..294942d 100644
>> --- a/drivers/base/dma-mapping.c
>> +++ b/drivers/base/dma-mapping.c
>> @@ -7,6 +7,7 @@
>> * This file is released under the GPLv2.
>> */
>>
>> +#include <linux/acpi.h>
>> #include <linux/dma-mapping.h>
>> #include <linux/export.h>
>> #include <linux/gfp.h>
>> @@ -352,6 +353,7 @@ int dma_configure(struct device *dev)
>> {
>> struct device *_dev = dev;
>> int is_pci = dev_is_pci(dev);
>> + enum dev_dma_attr attr;
>> int ret = 0;
>>
>> if (is_pci) {
>> @@ -361,8 +363,16 @@ int dma_configure(struct device *dev)
>> _dev = _dev->parent;
>> }
>>
>> - if (_dev->of_node)
>> + if (_dev->of_node) {
>> ret = of_dma_configure(dev, _dev->of_node);
>> + } else if (has_acpi_companion(_dev)) {
>> + attr = acpi_get_dma_attr(to_acpi_device_node(_dev->fwnode));
>> +
>> + if (attr == DEV_DMA_NOT_SUPPORTED)
>> + dev_warn(dev, "DMA not supported.\n");
>
>The changes you are making are correct but now this dev_warn spits hell
>for non-pci devices that do not support DMA (ie they do not have a _CCA
>on CONFIG_ACPI_CCA_REQUIRED systems), so you will have to remove it
>given that this path is now shared.
>
ok, will remove this WARN now.
Regards,
Sricharan
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
