> -----Original Message-----
> From: Intel-wired-lan <[email protected]> On Behalf Of Simon
> Horman
> Sent: Tuesday, August 26, 2025 5:52 PM
> To: Paul Menzel <[email protected]>
> Cc: Kohei Enju <[email protected]>; [email protected];
> [email protected]; [email protected]; Nguyen, Anthony L
> <[email protected]>; Kitszel, Przemyslaw
> <[email protected]>; Andrew Lunn <[email protected]>;
> David S. Miller <[email protected]>; Eric Dumazet
> <[email protected]>; Jakub Kicinski <[email protected]>; Paolo Abeni
> <[email protected]>; [email protected]
> Subject: Re: [Intel-wired-lan] [PATCH v1 iwl-next 1/2] igbvf: add 
> lbtx_packets and
> lbtx_bytes to ethtool statistics
> 
> On Wed, Aug 13, 2025 at 10:18:29AM +0200, Paul Menzel wrote:
> > Dear Kohei,
> >
> >
> > Thank you for your patch.
> >
> > Am 13.08.25 um 09:50 schrieb Kohei Enju:
> > > Currently ethtool shows lbrx_packets and lbrx_bytes (Good RX
> > > Packets/Octets loopback Count), but doesn't show the TX-side
> > > equivalents (lbtx_packets and lbtx_bytes). Add visibility of those
> > > missing statistics by adding them to ethtool statistics.
> > >
> > > In addition, the order of lbrx_bytes and lbrx_packets is not
> > > consistent with non-loopback statistics (rx_packets, rx_bytes).
> > > Therefore, align the order by swapping positions of lbrx_bytes and
> lbrx_packets.
> > >
> > > Tested on Intel Corporation I350 Gigabit Network Connection.
> > >
> > > Before:
> > >    # ethtool -S ens5 | grep -E "x_(bytes|packets)"
> > >         rx_packets: 135
> > >         tx_packets: 106
> > >         rx_bytes: 16010
> > >         tx_bytes: 12451
> > >         lbrx_bytes: 1148
> > >         lbrx_packets: 12
> > >
> > > After:
> > >    # ethtool -S ens5 | grep -E "x_(bytes|packets)"
> > >         rx_packets: 748
> > >         tx_packets: 304
> > >         rx_bytes: 81513
> > >         tx_bytes: 33698
> > >         lbrx_packets: 97
> > >         lbtx_packets: 109
> > >         lbrx_bytes: 12090
> > >         lbtx_bytes: 12401
> > >
> > > Tested-by: Kohei Enju <[email protected]>
> >
> > No need to resend, but I believe, you only add a Tested-by: tag, if
> > the person differs from the author/Signed-off-by: tag.
> 
> +1
> 
> >
> > > Signed-off-by: Kohei Enju <[email protected]>
> > > ---
> > >   drivers/net/ethernet/intel/igbvf/ethtool.c | 4 +++-
> > >   1 file changed, 3 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/net/ethernet/intel/igbvf/ethtool.c
> > > b/drivers/net/ethernet/intel/igbvf/ethtool.c
> > > index 773895c663fd..c6defc495f13 100644
> > > --- a/drivers/net/ethernet/intel/igbvf/ethtool.c
> > > +++ b/drivers/net/ethernet/intel/igbvf/ethtool.c
> > > @@ -30,8 +30,10 @@ static const struct igbvf_stats igbvf_gstrings_stats[] 
> > > = {
> > >           { "rx_bytes", IGBVF_STAT(stats.gorc, stats.base_gorc) },
> > >           { "tx_bytes", IGBVF_STAT(stats.gotc, stats.base_gotc) },
> > >           { "multicast", IGBVF_STAT(stats.mprc, stats.base_mprc) },
> > > - { "lbrx_bytes", IGBVF_STAT(stats.gorlbc, stats.base_gorlbc) },
> > >           { "lbrx_packets", IGBVF_STAT(stats.gprlbc, stats.base_gprlbc) },
> > > + { "lbtx_packets", IGBVF_STAT(stats.gptlbc, stats.base_gptlbc) },
> > > + { "lbrx_bytes", IGBVF_STAT(stats.gorlbc, stats.base_gorlbc) },
> > > + { "lbtx_bytes", IGBVF_STAT(stats.gotlbc, stats.base_gotlbc) },
> > >           { "tx_restart_queue", IGBVF_STAT(restart_queue, zero_base) },
> > >           { "tx_timeout_count", IGBVF_STAT(tx_timeout_count, zero_base) },
> > >           { "rx_long_byte_count", IGBVF_STAT(stats.gorc, stats.base_gorc)
> > > },
> >
> > Reviewed-by: Paul Menzel <[email protected]>
> 
> Also +1
> 
> Reviewed-by: Simon Horman <[email protected]>


Tested-by: Rafal Romanowski <[email protected]>


Reply via email to