Dear Ahmed, dear Junfeng,

Thank you for the patch.


Am 10.07.24 um 22:40 schrieb Ahmed Zaki:
From: Junfeng Guo <junfeng....@intel.com>

The SWAP Flag in the FDIR Programming Descriptor doesn't work properly,
it is always set and cannot be unset (hardware bug).

Please document the datasheet/errata.

Thus, add a method
to effectively disable the FDIR SWAP option by setting the FDSWAP instead
of FDINSET registers.

Please paste the new debug messages.

Reviewed-by: Marcin Szycik <marcin.szy...@linux.intel.com>
Signed-off-by: Junfeng Guo <junfeng....@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.z...@intel.com>
---
  .../net/ethernet/intel/ice/ice_flex_pipe.c    | 52 ++++++++++++++++++-
  .../net/ethernet/intel/ice/ice_flex_pipe.h    |  4 +-
  drivers/net/ethernet/intel/ice/ice_flow.c     |  2 +-
  3 files changed, 54 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_flex_pipe.c 
b/drivers/net/ethernet/intel/ice/ice_flex_pipe.c
index 20d5db88c99f..a750d7e1edd8 100644
--- a/drivers/net/ethernet/intel/ice/ice_flex_pipe.c
+++ b/drivers/net/ethernet/intel/ice/ice_flex_pipe.c
@@ -2981,6 +2981,51 @@ ice_add_prof_attrib(struct ice_prof_map *prof, u8 ptg, 
u16 ptype,
  }
/**
+ * ice_disable_fd_swap - set register appropriately to disable FD swap

Below you write SWAP all uppercase.

+ * @hw: pointer to the HW struct
+ * @prof_id: profile ID
+ *
+ * Return: Void.
+ */
+static void
+ice_disable_fd_swap(struct ice_hw *hw, u8 prof_id)
+{
+       u16 swap_val, i, fvw_num;

Try to use non-fixed-width types, where possible.

+
+       swap_val = ICE_SWAP_VALID;
+       fvw_num = hw->blk[ICE_BLK_FD].es.fvw / ICE_FDIR_REG_SET_SIZE;
+
+       /* Since the SWAP Flag in the Programming Desc doesn't work,
+        * here add method to disable the SWAP Option via setting
+        * certain SWAP and INSET register sets.
+        */
+       for (i = 0; i < fvw_num ; i++) {
+               u32 raw_swap, raw_in;
+               u8 j;

unsigned int

+
+               raw_swap = 0;
+               raw_in = 0;
+
+               for (j = 0; j < ICE_FDIR_REG_SET_SIZE; j++) {
+                       raw_swap |= (swap_val++) << (j * BITS_PER_BYTE);
+                       raw_in |= ICE_INSET_DFLT << (j * BITS_PER_BYTE);
+               }
+
+               /* write the FDIR swap register set */
+               wr32(hw, GLQF_FDSWAP(prof_id, i), raw_swap);
+
+               ice_debug(hw, ICE_DBG_INIT, "swap wr(%d, %d): 0x%x = 0x%08x\n",
+                         prof_id, i, GLQF_FDSWAP(prof_id, i), raw_swap);
+
+               /* write the FDIR inset register set */
+               wr32(hw, GLQF_FDINSET(prof_id, i), raw_in);
+
+               ice_debug(hw, ICE_DBG_INIT, "inset wr(%d, %d): 0x%x = 0x%08x\n",
+                         prof_id, i, GLQF_FDINSET(prof_id, i), raw_in);
+       }
+}
+
+/*
   * ice_add_prof - add profile
   * @hw: pointer to the HW struct
   * @blk: hardware block
@@ -2991,6 +3036,7 @@ ice_add_prof_attrib(struct ice_prof_map *prof, u8 ptg, 
u16 ptype,
   * @es: extraction sequence (length of array is determined by the block)
   * @masks: mask for extraction sequence
   * @symm: symmetric setting for RSS profiles
+ * @fd_swap: enable/disable FDIR paired src/dst fields swap option
   *
   * This function registers a profile, which matches a set of PTYPES with a
   * particular extraction sequence. While the hardware profile is allocated
@@ -3000,7 +3046,7 @@ ice_add_prof_attrib(struct ice_prof_map *prof, u8 ptg, 
u16 ptype,
  int
  ice_add_prof(struct ice_hw *hw, enum ice_block blk, u64 id, u8 ptypes[],
             const struct ice_ptype_attributes *attr, u16 attr_cnt,
-            struct ice_fv_word *es, u16 *masks, bool symm)
+            struct ice_fv_word *es, u16 *masks, bool symm, bool fd_swap)
  {
        u32 bytes = DIV_ROUND_UP(ICE_FLOW_PTYPE_MAX, BITS_PER_BYTE);
        DECLARE_BITMAP(ptgs_used, ICE_XLT1_CNT);
@@ -3020,7 +3066,7 @@ ice_add_prof(struct ice_hw *hw, enum ice_block blk, u64 
id, u8 ptypes[],
                status = ice_alloc_prof_id(hw, blk, &prof_id);
                if (status)
                        goto err_ice_add_prof;
-               if (blk == ICE_BLK_FD) {
+               if (blk == ICE_BLK_FD && fd_swap) {
                        /* For Flow Director block, the extraction sequence may
                         * need to be altered in the case where there are paired
                         * fields that have no match. This is necessary because
@@ -3031,6 +3077,8 @@ ice_add_prof(struct ice_hw *hw, enum ice_block blk, u64 
id, u8 ptypes[],
                        status = ice_update_fd_swap(hw, prof_id, es);
                        if (status)
                                goto err_ice_add_prof;
+               } else if (blk == ICE_BLK_FD) {
+                       ice_disable_fd_swap(hw, prof_id);
                }
                status = ice_update_prof_masking(hw, blk, prof_id, masks);
                if (status)
diff --git a/drivers/net/ethernet/intel/ice/ice_flex_pipe.h 
b/drivers/net/ethernet/intel/ice/ice_flex_pipe.h
index b39d7cdc381f..7c66652dadd6 100644
--- a/drivers/net/ethernet/intel/ice/ice_flex_pipe.h
+++ b/drivers/net/ethernet/intel/ice/ice_flex_pipe.h
@@ -6,6 +6,8 @@
#include "ice_type.h" +#define ICE_FDIR_REG_SET_SIZE 4
+
  int
  ice_acquire_change_lock(struct ice_hw *hw, enum ice_aq_res_access_type 
access);
  void ice_release_change_lock(struct ice_hw *hw);
@@ -42,7 +44,7 @@ bool ice_hw_ptype_ena(struct ice_hw *hw, u16 ptype);
  int
  ice_add_prof(struct ice_hw *hw, enum ice_block blk, u64 id, u8 ptypes[],
             const struct ice_ptype_attributes *attr, u16 attr_cnt,
-            struct ice_fv_word *es, u16 *masks, bool symm);
+            struct ice_fv_word *es, u16 *masks, bool symm, bool fd_swap);
  struct ice_prof_map *
  ice_search_prof_id(struct ice_hw *hw, enum ice_block blk, u64 id);
  int
diff --git a/drivers/net/ethernet/intel/ice/ice_flow.c 
b/drivers/net/ethernet/intel/ice/ice_flow.c
index fc2b58f56279..79106503194b 100644
--- a/drivers/net/ethernet/intel/ice/ice_flow.c
+++ b/drivers/net/ethernet/intel/ice/ice_flow.c
@@ -1400,7 +1400,7 @@ ice_flow_add_prof_sync(struct ice_hw *hw, enum ice_block 
blk,
        /* Add a HW profile for this flow profile */
        status = ice_add_prof(hw, blk, prof_id, (u8 *)params->ptypes,
                              params->attr, params->attr_cnt, params->es,
-                             params->mask, symm);
+                             params->mask, symm, true);
        if (status) {
                ice_debug(hw, ICE_DBG_FLOW, "Error adding a HW flow profile\n");
                goto out;


Kind regards,

Paul

Reply via email to