On 12/1/2023 09:50, Kurt Kanzenbach wrote:
Currently the driver allows to configure matching by VLAN EtherType. However, the retrieval function does not report it back to the user. Add it.Before: |root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 action 0 |Added rule with ID 63 |root@host:~# ethtool --show-ntuple enp3s0 |4 RX rings available |Total 1 rules | |Filter: 63 | Flow Type: Raw Ethernet | Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Ethertype: 0x0 mask: 0xFFFF | Action: Direct to queue 0 After: |root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 action 0 |Added rule with ID 63 |root@host:~# ethtool --show-ntuple enp3s0 |4 RX rings available |Total 1 rules | |Filter: 63 | Flow Type: Raw Ethernet | Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Ethertype: 0x0 mask: 0xFFFF | VLAN EtherType: 0x8100 mask: 0x0 | VLAN: 0x0 mask: 0xffff | User-defined: 0x0 mask: 0xffffffffffffffff | Action: Direct to queue 0 Fixes: 2b477d057e33 ("igc: Integrate flex filter into ethtool ops") Signed-off-by: Kurt Kanzenbach <k...@linutronix.de> Acked-by: Vinicius Costa Gomes <vinicius.go...@intel.com> --- drivers/net/ethernet/intel/igc/igc_ethtool.c | 6 ++++++ 1 file changed, 6 insertions(+)
Tested-by: Naama Meir <naamax.m...@linux.intel.com> _______________________________________________ Intel-wired-lan mailing list Intel-wired-lan@osuosl.org https://lists.osuosl.org/mailman/listinfo/intel-wired-lan
