Signed-off-by: Imre Deak <imre.d...@intel.com>
---
drivers/gpu/drm/i915/intel_runtime_pm.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c
b/drivers/gpu/drm/i915/intel_runtime_pm.c
index 2c2151f..9945040 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -1975,9 +1975,15 @@ int intel_power_domains_init(struct drm_i915_private
*dev_priv)
*/
void intel_power_domains_fini(struct drm_i915_private *dev_priv)
{
- /* The i915.ko module is still not prepared to be loaded when
+ /*
+ * The i915.ko module is still not prepared to be loaded when
* the power well is not enabled, so just enable it in case
- * we're going to unload/reload. */
+ * we're going to unload/reload.
+ * The following also reacquires the RPM reference the core passed
+ * to the driver during loading, which is dropped in
+ * intel_runtime_pm_enable(). We have to hand back the control of the
+ * device to the core with this reference held.
+ */
intel_display_set_init_power(dev_priv, true);
/* Remove the refcount we took to keep power well support disabled. */
@@ -2313,6 +2319,11 @@ void intel_runtime_pm_enable(struct drm_i915_private
*dev_priv)
pm_runtime_mark_last_busy(device);
pm_runtime_use_autosuspend(device);
+ /*
+ * The core calls the driver load handler with an RPM reference held.
+ * We drop that here and will reacquire it during unloading in
+ * intel_power_domains_fini().
+ */
pm_runtime_put_autosuspend(device);
}
--
2.5.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
