On Fri, May 29, 2015 at 07:16:36PM +0200, Daniel Vetter wrote:
> On Fri, May 29, 2015 at 04:06:59PM +0530, Gaurav K Singh wrote:
> > During disable sequence for MIPI encoder in command mode, disable
> > MIPI display self-refresh mode bit in Pipe Ctrl reg.
> >
> > Signed-off-by: Gaurav K Singh <gaurav.k.si...@intel.com>
> > Signed-off-by: Yogesh Mohan Marimuthu <yogesh.mohan.marimu...@intel.com>
> > Signed-off-by: Shobhit Kumar <shobhit.ku...@intel.com>
> > ---
> > drivers/gpu/drm/i915/intel_display.c | 13 +++++++++++++
> > 1 file changed, 13 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_display.c
> > b/drivers/gpu/drm/i915/intel_display.c
> > index 895d7c7..cab2ac8 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -2171,6 +2171,9 @@ static void intel_enable_pipe(struct intel_crtc *crtc)
> > static void intel_disable_pipe(struct intel_crtc *crtc)
> > {
> > struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
> > + struct intel_encoder *encoder;
> > + struct intel_dsi *intel_dsi;
> > + struct drm_device *dev = crtc->base.dev;
> > enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
> > enum pipe pipe = crtc->pipe;
> > int reg;
> > @@ -2189,6 +2192,16 @@ static void intel_disable_pipe(struct intel_crtc
> > *crtc)
> > if ((val & PIPECONF_ENABLE) == 0)
> > return;
> >
> > + for_each_encoder_on_crtc(dev, &crtc->base, encoder) {
> > + if (encoder->type == INTEL_OUTPUT_DSI) {
> > + intel_dsi = enc_to_intel_dsi(&encoder->base);
> > + if (intel_dsi && (intel_dsi->operation_mode ==
> > + INTEL_DSI_COMMAND_MODE))
> > + val = val & ~PIPECONF_MIPI_DSR_ENABLE;
> > + break;
> > + }
> > + }
>
> This must be moved into a suitable encoder callback. Yes the ddi code is
> full of cases where encoder stuff is done from the generic crtc code. But
> we now have 2 completely different kinds of ports on bxt (ddi and dsi),
> and we need to get some solid structure into the code again.
Ah I missed that this is a pipeconf thing. Unconditionally clearing this
bit will achieve the same, without the need to loop over connectors.
-Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
