Hi,
On 09/04/2014 12:27 PM, Damien Lespiau wrote:
From: Satheeshakrishna M <satheeshakrishn...@intel.com>
This patch implements SKL DPLL programming that includes:
- DPLL allocation
- wide range PLL calculation and programming
- DP link rate programming
- DDI to DPLL mapping
v2: Incorporated following changes
- Added vfunc for function required outside
- Fixed multiple comments in WRPLL calculation
v3: - Fix the DCO computation
- Move the initialization up to not clobber the computed values
- Use the correct macro for DP link rate programming.
- Use wait_for() to wait for the PLL locked bit
v4: Rebase on top of nigthly (Damien)
v5: A few code cleanups in the WRPLL computation (Damien)
- Use uint32_t when possible
- Use abs_diff() in the WRPLL computation
- Make the 64bits divisions use div64_u64()
- Fix typo in dco_central_feq_deviation (freq)
- Replace the chain of breaks with a goto
v6: Port of the patch to work on top of the shared DPLLs (Damien)
v7: Don't try to handle eDP in ddi_pll_select() (Damien)
[snip]
+static bool
+skl_ddi_pll_select(struct intel_crtc *intel_crtc,
+ struct intel_encoder *intel_encoder,
+ int clock)
+{
+ struct intel_shared_dpll *pll;
+ uint32_t ctrl1, cfgcr1, cfgcr2;
+
+ /*
+ * See comment in intel_dpll_hw_state to understand why we always use 0
+ * as the DPLL id in this function.
+ */
+
+ ctrl1 = DPLL_CTRL1_OVERRIDE(0);
+
+ if (intel_encoder->type == INTEL_OUTPUT_HDMI) {
+ struct skl_wrpll_params wrpll_params = { 0, };
+
+ ctrl1 |= DPLL_CTRL1_HDMI_MODE(0);
+
+ skl_ddi_calculate_wrpll(clock * 1000, &wrpll_params);
+
+ cfgcr1 = DPLL_CFGCR1_FREQ_ENABLE |
+ DPLL_CFGCR1_DCO_FRACTION(wrpll_params.dco_fraction) |
+ wrpll_params.dco_integer;
+
+ cfgcr2 = DPLL_CFGCR2_QDIV_RATIO(wrpll_params.qdiv_ratio) |
+ DPLL_CFGCR2_QDIV_MODE(wrpll_params.qdiv_mode) |
+ DPLL_CFGCR2_KDIV(wrpll_params.kdiv) |
+ DPLL_CFGCR2_PDIV(wrpll_params.pdiv) |
+ wrpll_params.central_freq;
+ } else if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT) {
+ struct drm_encoder *encoder = &intel_encoder->base;
+ struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+
+ switch (intel_dp->link_bw) {
+ case DP_LINK_BW_1_62:
+ ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_810,
0);
+ break;
+ case DP_LINK_BW_2_7:
+ ctrl1 |=
DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_1350, 0);
+ break;
+ case DP_LINK_BW_5_4:
+ ctrl1 |=
DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_2700, 0);
+ break;
+ }
+
+ cfgcr1 = cfgcr2 = 0;
+ } else /* eDP */
+ return true;
+ intel_crtc->config.dpll_hw_state.ctrl1 = ctrl1;
+ intel_crtc->config.dpll_hw_state.cfgcr1 = cfgcr1;
+ intel_crtc->config.dpll_hw_state.cfgcr2 = cfgcr2;
The return before updating the dpll_hw_state in the eDP case interacts with:
commit 4978cc93d9ac240b435ce60431aef24239b4c270
Author: Ander Conselvan de Oliveira <ander.conselvan.de.olive...@intel.com>
Date: Tue Apr 21 17:13:21 2015 +0300
drm/i915: Preserve shared DPLL information in new pipe_config
And results with a bunch of:
[drm:check_crtc_state [i915]] *ERROR* mismatch in dpll_hw_state.ctrl1
(expected 0x00000000, found 0x00000001)
On boot and afterwards.
Not sure what is the fix so maybe someone knows?
Regards,
Tvrtko
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
