From: chandra konduru <chandra.kond...@intel.com>
This patch adds kms_nv12 test case. It covers testing NV12 in
all supported linear/tile-X/tile-Y/tile-Yf tile formats in
0 and 180 orientations. For each tiling format, it tests
various combinations of planes and scaling.
It has some very preliminary crc support and it is bit flaky.
Though I have seen once-in-a-while crc check failures, most of the
time they pass, so enabled by-default. If they cause headaches
they can be disabled as needed.
Signed-off-by: chandra konduru <chandra.kond...@intel.com>
---
tests/.gitignore | 1 +
tests/Android.mk | 1 +
tests/Makefile.sources | 1 +
tests/kms_nv12.c | 529 +++++++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 532 insertions(+)
create mode 100644 tests/kms_nv12.c
diff --git a/tests/.gitignore b/tests/.gitignore
index 796e330..35c0e6e 100644
--- a/tests/.gitignore
+++ b/tests/.gitignore
@@ -147,6 +147,7 @@ kms_vblank
kms_crtc_background_color
kms_plane_scaling
kms_panel_fitting
+kms_nv12
pm_lpsp
pm_rc6_residency
pm_rpm
diff --git a/tests/Android.mk b/tests/Android.mk
index fac9931..c0c6383 100644
--- a/tests/Android.mk
+++ b/tests/Android.mk
@@ -81,6 +81,7 @@ else
kms_pwrite_crc \
kms_pipe_b_c_ivb \
kms_legacy_colorkey
+ kms_nv12 \
IGT_LOCAL_CFLAGS += -DANDROID_HAS_CAIRO=0
endif
diff --git a/tests/Makefile.sources b/tests/Makefile.sources
index 4cbc50d..b68224e 100644
--- a/tests/Makefile.sources
+++ b/tests/Makefile.sources
@@ -78,6 +78,7 @@ TESTS_progs_M = \
kms_crtc_background_color \
kms_plane_scaling \
kms_panel_fitting \
+ kms_nv12 \
pm_lpsp \
pm_rpm \
pm_rps \
diff --git a/tests/kms_nv12.c b/tests/kms_nv12.c
new file mode 100644
index 0000000..e88c934
--- /dev/null
+++ b/tests/kms_nv12.c
@@ -0,0 +1,529 @@
+/*
+ * Copyright © 2013,2014 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+
+#include <math.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+
+#include "drmtest.h"
+#include "igt_debugfs.h"
+#include "igt_kms.h"
+#include "igt_core.h"
+#include "intel_chipset.h"
+#include "ioctl_wrappers.h"
+
+IGT_TEST_DESCRIPTION("Test display NV12 support");
+
+uint32_t devid;
+typedef struct {
+ int drm_fd;
+ igt_display_t display;
+ igt_crc_t crc1;
+ igt_crc_t crc2;
+ igt_pipe_crc_t *pipe_crc;
+ int num_scalers;
+
+ struct igt_fb fb1;
+ struct igt_fb fb1_nv12;
+ struct igt_fb fb2;
+ struct igt_fb fb2_nv12;
+ struct igt_fb fb3;
+ struct igt_fb fb3_nv12;
+ int fb_id1;
+ int fb_id1_nv12;
+ int fb_id2;
+ int fb_id2_nv12;
+ int fb_id3;
+ int fb_id3_nv12;
+
+ igt_plane_t *plane1;
+ igt_plane_t *plane2;
+ igt_plane_t *plane3;
+
+ uint64_t tiled;
+ int rotation;
+ int crc;
+} data_t;
+
+#define IMG_FILE "1080p-left.png"
+#define SOLID_COLOR 0xFFFFFF /* BGR 8bpc */
+
+static void
+paint_pattern(data_t *d, struct igt_fb *fb, uint16_t w, uint16_t h)
+{
+ cairo_t *cr;
+
+ cr = igt_get_cairo_ctx(d->drm_fd, fb);
+ igt_paint_test_pattern(cr, w, h);
+ cairo_destroy(cr);
+}
+
+static void
+paint_image(data_t *d, struct igt_fb *fb, uint16_t w, uint16_t h)
+{
+ cairo_t *cr;
+
+ cr = igt_get_cairo_ctx(d->drm_fd, fb);
+ igt_paint_image(cr, IMG_FILE, 0, 0, w, h);
+ cairo_destroy(cr);
+}
+
+static void
+paint_solid_color(data_t *d, struct igt_fb *fb, uint16_t w, uint16_t h,
+ uint32_t color)
+{
+ cairo_t *cr;
+ double r, g, b;
+
+ cr = igt_get_cairo_ctx(d->drm_fd, fb);
+
+ /* Paint with solid color */
+ r = (double) (color & 0xFF) / 255.0;
+ g = (double) ((color & 0xFF00) >> 8) / 255.0;
+ b = (double) ((color & 0xFF0000) >> 16) / 255.0;
+ igt_paint_color(cr, 0, 0, w, h, r, g, b);
+
+ cairo_destroy(cr);
+}
+
+static void prepare_crtc(data_t *data, igt_output_t *output, enum pipe pipe,
+ igt_plane_t *plane, drmModeModeInfo *mode, enum
igt_commit_style s)
+{
+ igt_display_t *display = &data->display;
+
+ igt_output_set_pipe(output, pipe);
+
+ /* create the pipe_crc object for this pipe */
+ igt_pipe_crc_free(data->pipe_crc);
+ data->pipe_crc = igt_pipe_crc_new(pipe, INTEL_PIPE_CRC_SOURCE_AUTO);
+
+ /* before allocating, free if any older fb */
+ if (data->fb_id1) {
+ igt_remove_fb(data->drm_fd, &data->fb1);
+ data->fb_id1 = 0;
+ }
+
+ /* allocate fb for plane 1 */
+ data->fb_id1 = igt_create_fb(data->drm_fd,
+ mode->hdisplay, mode->vdisplay,
+ DRM_FORMAT_XRGB8888,
+ LOCAL_I915_FORMAT_MOD_X_TILED, /* tiled */
+ &data->fb1);
+ igt_assert(data->fb_id1);
+
+ paint_pattern(data, &data->fb1, mode->hdisplay, mode->vdisplay);
+
+ /*
+ * We always set the primary plane to actually enable the pipe as
+ * there's no way (that works) to light up a pipe with only a sprite
+ * plane enabled at the moment.
+ */
+ if (!plane->is_primary) {
+ igt_plane_t *primary;
+
+ primary = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
+ igt_plane_set_fb(primary, &data->fb1);
+ }
+
+ igt_plane_set_fb(plane, &data->fb1);
+ if (s == COMMIT_LEGACY) {
+ int ret;
+ ret = drmModeSetCrtc(data->drm_fd,
+ output->config.crtc->crtc_id,
+ data->fb_id1,
+ plane->pan_x, plane->pan_y,
+ &output->id,
+ 1,
+ mode);
+ igt_assert(ret == 0);
+ } else {
+ igt_display_commit2(display, s);
+ }
+}
+
+static void cleanup_crtc(data_t *data, igt_output_t *output, igt_plane_t
*plane)
+{
+ igt_display_t *display = &data->display;
+
+ igt_pipe_crc_free(data->pipe_crc);
+ data->pipe_crc = NULL;
+
+ if (data->fb_id1) {
+ igt_remove_fb(data->drm_fd, &data->fb1);
+ data->fb_id1 = 0;
+ }
+ if (data->fb_id2) {
+ igt_remove_fb(data->drm_fd, &data->fb2);
+ data->fb_id2 = 0;
+ }
+ if (data->fb_id3) {
+ igt_remove_fb(data->drm_fd, &data->fb3);
+ data->fb_id3 = 0;
+ }
+
+ if (data->fb_id1_nv12) {
+ igt_remove_fb(data->drm_fd, &data->fb1_nv12);
+ data->fb_id1_nv12 = 0;
+ }
+
+ if (data->fb_id2_nv12) {
+ igt_remove_fb(data->drm_fd, &data->fb2_nv12);
+ data->fb_id2_nv12 = 0;
+ }
+
+ if (data->fb_id3_nv12) {
+ igt_remove_fb(data->drm_fd, &data->fb3_nv12);
+ data->fb_id3_nv12 = 0;
+ }
+
+ if (!plane->is_primary) {
+ igt_plane_t *primary;
+
+ primary = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
+ igt_plane_set_fb(primary, NULL);
+ }
+
+ igt_plane_set_fb(plane, NULL);
+ igt_output_set_pipe(output, PIPE_ANY);
+
+ igt_display_commit2(display, COMMIT_UNIVERSAL);
+}
+
+static void test_nv12_plane(data_t *d)
+{
+ igt_display_t *display = &d->display;
+ igt_output_t *output;
+ enum pipe pipe;
+ int valid_tests = 0;
+ int img_width;
+ int img_height;
+
+ igt_require(d->display.has_universal_planes);
+ igt_require(d->num_scalers);
+
+ for_each_connected_output(display, output) {
+ drmModeModeInfo *mode;
+ mode = igt_output_get_mode(output);
+ pipe = output->config.pipe;
+
+ igt_output_set_pipe(output, pipe);
+
+ /* get planes */
+ d->plane1 = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
+ d->plane2 = igt_output_get_plane(output, IGT_PLANE_2);
+ d->plane3 = igt_output_get_plane(output, IGT_PLANE_3);
+
+ /* set required rotation */
+ igt_plane_set_rotation(d->plane1, d->rotation);
+ igt_plane_set_rotation(d->plane2, d->rotation);
+ igt_plane_set_rotation(d->plane3, d->rotation);
+
+ /* Set up display with plane 1 */
+ prepare_crtc(d, output, pipe, d->plane1, mode, COMMIT_LEGACY);
+
+ /* allocate fb2, fb2_nv12, fb1_nv12 with image size */
+ igt_get_image_size(IMG_FILE, &img_width, &img_height);
+
+ /* fb2 is in RGB format */
+ d->fb_id2 = igt_create_fb(d->drm_fd,
+ img_width, img_height,
+ DRM_FORMAT_XRGB8888,
+ d->tiled, /* tiled */
+ &d->fb2);
+ igt_assert(d->fb_id2);
+
+ /* fb1_nv12 is in NV12 format */
+ d->fb_id1_nv12 = igt_create_fb(d->drm_fd,
+ img_width, img_height,
+ DRM_FORMAT_NV12,
+ d->tiled, /* tiled */
+ &d->fb1_nv12);
+ igt_assert(d->fb_id1_nv12);
+
+ /* fb2_nv12 is in NV12 format */
+ d->fb_id2_nv12 = igt_create_fb(d->drm_fd,
+ img_width, img_height,
+ DRM_FORMAT_NV12,
+ d->tiled,
+ &d->fb2_nv12);
+ igt_assert(d->fb_id2_nv12);
+
+ /* fb3 is in RGB */
+ d->fb_id3 = igt_create_fb(d->drm_fd,
+ mode->hdisplay, mode->vdisplay,
+ DRM_FORMAT_ARGB8888,
+ d->tiled, /* tiled */
+ &d->fb3);
+ igt_assert(d->fb_id3);
+
+ if (d->crc) {
+ /*
+ * CRC test:
+ * 1st CRC: plane 1: RGB FS, plane 2: RGB 19x10 -->
CRC1
+ * 2nd CRC: plane 1: RGB FS, plane 2: NV12 19x10 -->
CRC2
+ * make sure CRC1 == CRC2
+ *
+ * For CRCs to work, cannot use any image/data because
+ * chrome-upsampling can fail CRC comparison.
+ * Though it is a very basic, solid color is expected
to work
+ */
+ paint_solid_color(d, &d->fb2, d->fb2.width,
d->fb2.height,
+ SOLID_COLOR);
+
+ /* Setup to capture CRC1 when plane 2 is in RGB mode */
+ igt_plane_set_fb(d->plane2, &d->fb2);
+ igt_fb_set_position(&d->fb2, d->plane2, 0, 0);
+ igt_fb_set_size(&d->fb2, d->plane2, d->fb2.width,
d->fb2.height);
+ igt_plane_set_position(d->plane2, 0, 0);
+ igt_plane_set_size(d->plane2, d->fb2.width,
d->fb2.height);
+ igt_display_commit2(display, COMMIT_UNIVERSAL);
+ igt_pipe_crc_collect_crc(d->pipe_crc, &d->crc1);
+
+ /* Setup to capture CRC2 when plane 2 is in NV12 mode */
+ igt_fb_csc_xrgb_to_nv12(d->drm_fd, &d->fb2_nv12,
&d->fb2);
+ igt_plane_set_fb(d->plane2, &d->fb2_nv12);
+ igt_fb_set_position(&d->fb2_nv12, d->plane2, 0, 0);
+ igt_fb_set_size(&d->fb2_nv12, d->plane2,
d->fb2_nv12.width,
+ d->fb2_nv12.height);
+ igt_plane_set_position(d->plane2, 0, 0);
+ igt_plane_set_size(d->plane2,
d->fb2_nv12.width,d->fb2_nv12.height);
+ igt_display_commit2(display, COMMIT_UNIVERSAL);
+ igt_pipe_crc_collect_crc(d->pipe_crc, &d->crc2);
+
+ igt_assert_crc_equal(&d->crc1, &d->crc2);
+ }
+
+ /*
+ * Non-CRC tests:
+ * Mimicing some not exactly but closer to some real usage
+ */
+
+ /* set up data for fb2: both fb1_nv12, fb2_nv12 uses this */
+ paint_image(d, &d->fb2, img_width, img_height);
+
+ /* set up data in fb1_nv12: fb2 RGB-> fb1_nv12 */
+ igt_fb_csc_xrgb_to_nv12(d->drm_fd, &d->fb1_nv12, &d->fb2);
+
+ /* set up data in fb2_nv12: fb2 RGB-> fb2_nv12 */
+ igt_fb_csc_xrgb_to_nv12(d->drm_fd, &d->fb2_nv12, &d->fb2);
+
+ /* set up data in fb3 */
+ paint_pattern(d, &d->fb3, d->fb3.width, d->fb3.height);
+
+ /* Set up fb2_nv12->plane2 mapping. */
+ igt_plane_set_fb(d->plane2, &d->fb2_nv12);
+ /* 2nd plane nv12 windowed - no scaling */
+ igt_fb_set_position(&d->fb2_nv12, d->plane2, 0, 0);
+ igt_fb_set_size(&d->fb2_nv12, d->plane2, d->fb2_nv12.width,
+ d->fb2_nv12.height);
+ igt_plane_set_position(d->plane2, 0, 0);
+ igt_plane_set_size(d->plane2, d->fb2_nv12.width,
d->fb2_nv12.height);
+ igt_display_commit2(display, COMMIT_UNIVERSAL);
+
+ /* Change primary plane to nv12 full screen: scaling + NV12 */
+ igt_plane_set_fb(d->plane1, &d->fb1_nv12);
+ igt_fb_set_position(&d->fb1_nv12, d->plane1, 0, 0);
+ igt_fb_set_size(&d->fb1_nv12, d->plane1, d->fb1_nv12.width,
+ d->fb1_nv12.height);
+ igt_plane_set_position(d->plane1, 0, 0);
+ igt_plane_set_size(d->plane1, mode->hdisplay, mode->vdisplay);
+ igt_display_commit2(display, COMMIT_UNIVERSAL);
+
+ /* Set up fb3->plane3 mapping. */
+ igt_plane_set_fb(d->plane3, &d->fb3);
+
+ /* 3rd plane full screen - no scaling. */
+ igt_fb_set_position(&d->fb3, d->plane3, 0, 0);
+ igt_fb_set_size(&d->fb3, d->plane3, d->fb3.width,
d->fb3.height);
+ igt_plane_set_position(d->plane3, 0, 0);
+ igt_plane_set_size(d->plane3, d->fb3.width, d->fb3.height);
+ igt_display_commit2(display, COMMIT_UNIVERSAL);
+
+ /* 2nd plane nv12 up scaling */
+ igt_fb_set_position(&d->fb2_nv12, d->plane2, 0, 0);
+ igt_fb_set_size(&d->fb2_nv12, d->plane2, d->fb2_nv12.width,
+ d->fb2_nv12.height);
+ igt_plane_set_position(d->plane2, 100, 100);
+ igt_plane_set_size(d->plane2, mode->hdisplay-200,
mode->vdisplay-200);
+ igt_display_commit2(display, COMMIT_UNIVERSAL);
+
+ /* 2nd plane nv12 down scaling */
+ igt_fb_set_position(&d->fb2_nv12, d->plane2, 0, 0);
+ igt_fb_set_size(&d->fb2_nv12, d->plane2, d->fb2_nv12.width,
+ d->fb2_nv12.height);
+ igt_plane_set_position(d->plane2, 1024, 0);
+ igt_plane_set_size(d->plane2, d->fb2_nv12.width * 2/3,
+ d->fb2_nv12.height * 2/3);
+ igt_display_commit2(display, COMMIT_UNIVERSAL);
+
+ /* Back to single plane mode - rgb & no scaling */
+ igt_plane_set_fb(d->plane1, &d->fb1);
+ igt_plane_set_fb(d->plane2, NULL);
+ igt_plane_set_fb(d->plane3, NULL);
+ igt_fb_set_position(&d->fb1, d->plane1, 0, 0);
+ igt_fb_set_size(&d->fb1, d->plane1, mode->hdisplay,
mode->vdisplay);
+ igt_plane_set_position(d->plane1, 0, 0);
+ igt_plane_set_size(d->plane1, mode->hdisplay, mode->vdisplay);
+ igt_display_commit2(display, COMMIT_UNIVERSAL);
+
+ /* single plane mode - rgb & scaling */
+ igt_plane_set_fb(d->plane1, &d->fb1);
+ igt_fb_set_position(&d->fb1, d->plane1, 0, 0);
+ igt_fb_set_size(&d->fb1, d->plane1, d->fb1.width/2,
d->fb1.height/2);
+ igt_plane_set_position(d->plane1, 0, 0);
+ igt_plane_set_size(d->plane1, mode->hdisplay, mode->vdisplay);
+ igt_display_commit2(display, COMMIT_UNIVERSAL);
+
+ /* single plane mode - nv12 & scaling */
+ igt_plane_set_fb(d->plane1, &d->fb1_nv12);
+ igt_fb_set_position(&d->fb1_nv12, d->plane1, 0, 0);
+ igt_fb_set_size(&d->fb1_nv12, d->plane1, d->fb1_nv12.width,
+ d->fb1_nv12.height);
+ igt_plane_set_position(d->plane1, 0, 0);
+ igt_plane_set_size(d->plane1, mode->hdisplay, mode->vdisplay);
+ igt_display_commit2(display, COMMIT_UNIVERSAL);
+
+ valid_tests++;
+
+ cleanup_crtc(d, output, d->plane1);
+ }
+ igt_require_f(valid_tests, "no valid crtc/connector combinations
found\n");
+}
+
+static void test_nv12_unsupported_plane(data_t *d)
+{
+ igt_display_t *display = &d->display;
+ igt_output_t *output;
+ enum pipe pipe;
+ int valid_tests = 0;
+
+ igt_require(d->display.has_universal_planes);
+ igt_require(d->num_scalers);
+
+ for_each_connected_output(display, output) {
+ drmModeModeInfo *mode;
+ mode = igt_output_get_mode(output);
+ pipe = output->config.pipe;
+
+ igt_output_set_pipe(output, pipe);
+
+ /* Set up display with plane 1 */
+ d->plane1 = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
+ prepare_crtc(d, output, pipe, d->plane1, mode, COMMIT_LEGACY);
+
+ d->fb_id3_nv12 = igt_create_fb(d->drm_fd,
+ 1920, 1080,
+ DRM_FORMAT_NV12,
+ d->tiled,
+ &d->fb3_nv12);
+ igt_assert(d->fb_id3_nv12);
+
+ /* Set up fb3_nv12->plane3 mapping. */
+ d->plane2 = igt_output_get_plane(output, IGT_PLANE_3);
+ igt_plane_set_fb(d->plane3, &d->fb3_nv12);
+
+ /* 3rd plane nv12 windowed - no scaling */
+ igt_fb_set_position(&d->fb3_nv12, d->plane3, 0, 0);
+ igt_fb_set_size(&d->fb3_nv12, d->plane3, d->fb3_nv12.width,
+ d->fb3_nv12.height);
+ igt_plane_set_position(d->plane3, 0, 0);
+ igt_plane_set_size(d->plane3, d->fb3_nv12.width,
d->fb3_nv12.height);
+
+ /* Should fail because NV12 is not supported on plane 3 */
+ igt_assert(igt_display_try_commit2(display, COMMIT_UNIVERSAL)
+ == -EINVAL);
+
+ valid_tests++;
+
+ igt_plane_set_fb(d->plane3, NULL);
+ cleanup_crtc(d, output, d->plane1);
+ }
+ igt_require_f(valid_tests, "no valid crtc/connector combinations
found\n");
+}
+
+igt_main
+{
+ data_t data = {};
+
+ igt_skip_on_simulation();
+
+ igt_fixture {
+ data.drm_fd = drm_open_any();
+
+ kmstest_set_vt_graphics_mode();
+
+ igt_require_pipe_crc();
+
+ igt_display_init(&data.display, data.drm_fd);
+ }
+ devid = intel_get_drm_devid(data.drm_fd);
+
+ data.num_scalers = intel_gen(devid) >= 9 ? 2 : 0;
+
+ data.crc = 1;
+ data.rotation = IGT_ROTATION_0;
+ igt_subtest_f("nv12-plane-linear") {
+ data.tiled = LOCAL_DRM_FORMAT_MOD_NONE;
+ test_nv12_plane(&data);
+ }
+ igt_subtest_f("nv12-plane-tile-x") {
+ data.tiled = LOCAL_I915_FORMAT_MOD_X_TILED;
+ test_nv12_plane(&data);
+ }
+ igt_subtest_f("nv12-plane-tile-y") {
+ data.tiled = LOCAL_I915_FORMAT_MOD_Y_TILED;
+ test_nv12_plane(&data);
+ }
+ igt_subtest_f("nv12-plane-tile-yf") {
+ data.tiled = LOCAL_I915_FORMAT_MOD_Yf_TILED;
+ test_nv12_plane(&data);
+ }
+
+ data.rotation = IGT_ROTATION_180;
+ igt_subtest_f("nv12-plane-linear-rot-180") {
+ data.tiled = LOCAL_DRM_FORMAT_MOD_NONE;
+ test_nv12_plane(&data);
+ }
+ igt_subtest_f("nv12-plane-tile-x-rot-180") {
+ data.tiled = LOCAL_I915_FORMAT_MOD_X_TILED;
+ test_nv12_plane(&data);
+ }
+ igt_subtest_f("nv12-plane-tile-y-rot-180") {
+ data.tiled = LOCAL_I915_FORMAT_MOD_Y_TILED;
+ test_nv12_plane(&data);
+ }
+ igt_subtest_f("nv12-plane-tile-yf-rot-180") {
+ data.tiled = LOCAL_I915_FORMAT_MOD_Yf_TILED;
+ test_nv12_plane(&data);
+ }
+
+ igt_subtest_f("nv12-on-unsupported-plane") {
+ data.tiled = LOCAL_DRM_FORMAT_MOD_NONE;
+ test_nv12_unsupported_plane(&data);
+ }
+
+ igt_fixture {
+ igt_display_fini(&data.display);
+ }
+}
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
