On Wed, Dec 03, 2014 at 10:10:30AM -0800, clinton.a.tay...@intel.com wrote:
> From: Clint Taylor <clinton.a.tay...@intel.com>
> 
> Added PIPE C register support for CHV audio programming.

nak. The offset between the pipes looks constant so it should work
just fine with _PIPE().

> 
> Signed-off-by: Clint Taylor <clinton.a.tay...@intel.com>
> ---
>  drivers/gpu/drm/i915/i915_reg.h |   18 ++++++++++++------
>  1 file changed, 12 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index dc03fac..3d5813a 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -6189,14 +6189,18 @@ enum punit_power_well {
>  
>  #define _VLV_HDMIW_HDMIEDID_A                (VLV_DISPLAY_BASE + 0x62050)
>  #define _VLV_HDMIW_HDMIEDID_B                (VLV_DISPLAY_BASE + 0x62150)
> -#define VLV_HDMIW_HDMIEDID(pipe) _PIPE(pipe, \
> +#define _CHV_HDMIW_HDMIEDID_C                (VLV_DISPLAY_BASE + 0x62250)
> +#define VLV_HDMIW_HDMIEDID(pipe) _PIPE3(pipe, \
>                                       _VLV_HDMIW_HDMIEDID_A, \
> -                                     _VLV_HDMIW_HDMIEDID_B)
> +                                     _VLV_HDMIW_HDMIEDID_B, \
> +                                     _CHV_HDMIW_HDMIEDID_C)
>  #define _VLV_AUD_CNTL_ST_A           (VLV_DISPLAY_BASE + 0x620B4)
>  #define _VLV_AUD_CNTL_ST_B           (VLV_DISPLAY_BASE + 0x621B4)
> -#define VLV_AUD_CNTL_ST(pipe) _PIPE(pipe, \
> +#define _CHV_AUD_CNTL_ST_C           (VLV_DISPLAY_BASE + 0x622B4)
> +#define VLV_AUD_CNTL_ST(pipe) _PIPE3(pipe, \
>                                       _VLV_AUD_CNTL_ST_A, \
> -                                     _VLV_AUD_CNTL_ST_B)
> +                                     _VLV_AUD_CNTL_ST_B, \
> +                                     _CHV_AUD_CNTL_ST_C)
>  #define VLV_AUD_CNTL_ST2             (VLV_DISPLAY_BASE + 0x620C0)
>  
>  /* These are the 4 32-bit write offset registers for each stream
> @@ -6217,9 +6221,11 @@ enum punit_power_well {
>                                       _CPT_AUD_CONFIG_B)
>  #define _VLV_AUD_CONFIG_A            (VLV_DISPLAY_BASE + 0x62000)
>  #define _VLV_AUD_CONFIG_B            (VLV_DISPLAY_BASE + 0x62100)
> -#define VLV_AUD_CFG(pipe) _PIPE(pipe, \
> +#define _CHV_AUD_CONFIG_C            (VLV_DISPLAY_BASE + 0x62200)
> +#define VLV_AUD_CFG(pipe) _PIPE3(pipe, \
>                                       _VLV_AUD_CONFIG_A, \
> -                                     _VLV_AUD_CONFIG_B)
> +                                     _VLV_AUD_CONFIG_B, \
> +                                     _CHV_AUD_CONFIG_C)
>  
>  #define   AUD_CONFIG_N_VALUE_INDEX           (1 << 29)
>  #define   AUD_CONFIG_N_PROG_ENABLE           (1 << 28)
> -- 
> 1.7.9.5
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to