The biggest difference from HSW/BDW PSR here is that VLV enable_source
function enables PSR but let it in Inactive state. So it might be called
on early stage along with setup and enable_sink ones.
Signed-off-by: Rodrigo Vivi <rodrigo.v...@intel.com>
---
drivers/gpu/drm/i915/intel_dp.c | 161 ++++++++++++++++++++++++++++++++++++----
1 file changed, 145 insertions(+), 16 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index ac70b3a..335a711 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2134,7 +2134,44 @@ static void intel_edp_psr_write_vsc(struct intel_dp
*intel_dp,
POSTING_READ(ctl_reg);
}
-static void intel_edp_psr_setup_vsc(struct intel_dp *intel_dp)
+/**
+ * vlv_edp_psr_setup_vsc - Setup PSR related VSC aux registers on VLV+.
+ * @intel_dp: DP struct
+ *
+ * On VLV we don't need to generate VSC. It auto generates according
+ * EDP 1.3 spec, Table 3.10.
+ * HB0 - Secondary Data Packet ID = 0
+ * HB1 - Secondary Data Packet Type = 07h
+ * HB2 - Bits 4:0 = Revision Number = 02h
+ * Bits 7:5 = Reserved (all 0s)
+ * HB3 - Bits 4:0 Number of Valid Data Bytes = 08h
+ * Bits 7:5 Reserved
+ * DB0 - Bits 7:4 Stereo Interface Method Specific Paramenter
+ * Bits 3:0 Stereo Interface Method Code
+ * DB1 - Bit 0 - PSR State (0 when Inactive / 1 when Active)
+ * Bit 1 - Update RFB. (0 do not update RFB / 1 update RFB)
+ * Bit 2 - CRC Valid. VLV always send 0 which
+ * means CRC value in DB7:2 invalid
+ * Bits 7:3 - Reserved
+ * DB2-7 - CRC - don't care because DB1[2] always tells this is invalid.
+ */
+static void vlv_edp_psr_setup_vsc(struct intel_dp *intel_dp)
+{
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = intel_dig_port->base.base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_crtc *crtc = intel_dig_port->base.base.crtc;
+ enum pipe pipe = to_intel_crtc(crtc)->pipe;
+ uint32_t val;
+
+ /* VLV auto-generate VSC package as per EDP 1.3 spec, Table 3.10 */
+ val = I915_READ(VLV_VSCSDP(pipe));
+ val &= ~VLV_EDP_PSR_SDP_FREQ_MASK;
+ val |= VLV_EDP_PSR_SDP_FREQ_EVFRAME;
+ I915_WRITE(VLV_VSCSDP(pipe), val);
+}
+
+static void hsw_edp_psr_setup_vsc(struct intel_dp *intel_dp)
{
struct edp_vsc_psr psr_vsc;
@@ -2147,7 +2184,20 @@ static void intel_edp_psr_setup_vsc(struct intel_dp
*intel_dp)
intel_edp_psr_write_vsc(intel_dp, &psr_vsc);
}
-static void intel_edp_psr_enable_sink(struct intel_dp *intel_dp)
+/**
+ * vlv_edp_psr_enable_sink - Enable PSR on Panel for VLV.
+ * @intel_dp: DP struct
+ *
+ * This function enable PSR on Panel (Sink) side over DPCD write.
+ */
+static void vlv_edp_psr_enable_sink(struct intel_dp *intel_dp)
+{
+ /* Enable PSR in sink */
+ drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG,
+ DP_PSR_ENABLE);
+}
+
+static void hsw_edp_psr_enable_sink(struct intel_dp *intel_dp)
{
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = dig_port->base.base.dev;
@@ -2191,7 +2241,28 @@ static void intel_edp_psr_enable_sink(struct intel_dp
*intel_dp)
(aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT));
}
-static void intel_edp_psr_enable_source(struct intel_dp *intel_dp)
+/**
+ * vlv_edp_psr_enable_source - Enable PSR on VLV without activate it.
+ * @intel_dp: DP struct
+ *
+ * This function do the transition from PSR_state 0 to PSR_state 1 that is
+ * PSR Inactive one..
+ */
+static void vlv_edp_psr_enable_source(struct intel_dp *intel_dp)
+{
+ struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = dig_port->base.base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_crtc *crtc = dig_port->base.base.crtc;
+ enum pipe pipe = to_intel_crtc(crtc)->pipe;
+
+ I915_WRITE(VLV_PSRCTL(pipe),
+ VLV_EDP_PSR_SRC_TRANSMITTER_STATE |
+ VLV_EDP_PSR_MODE_SW_TIMER |
+ VLV_EDP_PSR_ENABLE);
+}
+
+static void hsw_edp_psr_enable_source(struct intel_dp *intel_dp)
{
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = dig_port->base.base.dev;
@@ -2276,7 +2347,7 @@ static void intel_edp_psr_do_enable(struct intel_dp
*intel_dp)
lockdep_assert_held(&dev_priv->psr.lock);
/* Enable/Re-enable PSR on the host */
- intel_edp_psr_enable_source(intel_dp);
+ hsw_edp_psr_enable_source(intel_dp);
dev_priv->psr.active = true;
}
@@ -2307,30 +2378,71 @@ void intel_edp_psr_enable(struct intel_dp *intel_dp)
dev_priv->psr.busy_frontbuffer_bits = 0;
- intel_edp_psr_setup_vsc(intel_dp);
+ if (HAS_DDI(dev)) {
+ hsw_edp_psr_setup_vsc(intel_dp);
+
+ /* Avoid continuous PSR exit by masking memup and hpd */
+ I915_WRITE(EDP_PSR_DEBUG_CTL(dev), EDP_PSR_DEBUG_MASK_MEMUP |
+ EDP_PSR_DEBUG_MASK_HPD | EDP_PSR_DEBUG_MASK_LPSP);
- /* Avoid continuous PSR exit by masking memup and hpd */
- I915_WRITE(EDP_PSR_DEBUG_CTL(dev), EDP_PSR_DEBUG_MASK_MEMUP |
- EDP_PSR_DEBUG_MASK_HPD | EDP_PSR_DEBUG_MASK_LPSP);
+ /* Enable PSR on the panel */
+ hsw_edp_psr_enable_sink(intel_dp);
+ } else {
+ vlv_edp_psr_setup_vsc(intel_dp);
- /* Enable PSR on the panel */
- intel_edp_psr_enable_sink(intel_dp);
+ /* Enable PSR on the panel */
+ vlv_edp_psr_enable_sink(intel_dp);
+
+ /* On HSW/BDW enable_source also means go to PSR entry/active
+ * state as soon as idle_frame achieved and here would be
+ * to soon. However on VLV enable_source just enable PSR
+ * but let it on inactive state. So we might do this prior
+ * to active transition, i.e. here.
+ */
+ vlv_edp_psr_enable_source(intel_dp);
+ }
dev_priv->psr.enabled = intel_dp;
unlock:
mutex_unlock(&dev_priv->psr.lock);
}
-void intel_edp_psr_disable(struct intel_dp *intel_dp)
+/**
+ * vlv_edp_psr_disable - Disable PSR on VLV
+ * @intel_dp: DP struct
+ *
+ * This function puts PSR VLV back to PSR_state 0 that is PSR Disabled.
+ */
+static void vlv_edp_psr_disable(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp_to_dev(intel_dp);
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc =
+ to_intel_crtc(intel_dig_port->base.base.crtc);
+ uint32_t val;
- mutex_lock(&dev_priv->psr.lock);
- if (!dev_priv->psr.enabled) {
- mutex_unlock(&dev_priv->psr.lock);
- return;
+ if (dev_priv->psr.active) {
+ if (wait_for((I915_READ(VLV_PSRSTAT(intel_crtc->pipe)) &
+ VLV_EDP_PSR_IN_TRANS) == 0, 250))
+ WARN(1, "PSR transition took longer than expected\n");
+
+ val = I915_READ(VLV_PSRCTL(intel_crtc->pipe));
+ val &= ~VLV_EDP_PSR_ACTIVE_ENTRY;
+ val &= ~VLV_EDP_PSR_ENABLE;
+ val &= ~VLV_EDP_PSR_MODE_MASK;
+ I915_WRITE(VLV_PSRCTL(intel_crtc->pipe), val);
+
+ dev_priv->psr.active = false;
+ } else {
+ WARN_ON(vlv_edp_is_psr_enabled_on_pipe(dev, intel_crtc->pipe));
}
+}
+
+static void hsw_edp_psr_disable(struct intel_dp *intel_dp)
+{
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
+ struct drm_i915_private *dev_priv = dev->dev_private;
if (dev_priv->psr.active) {
I915_WRITE(EDP_PSR_CTL(dev),
@@ -2345,6 +2457,23 @@ void intel_edp_psr_disable(struct intel_dp *intel_dp)
} else {
WARN_ON(I915_READ(EDP_PSR_CTL(dev)) & EDP_PSR_ENABLE);
}
+}
+
+void intel_edp_psr_disable(struct intel_dp *intel_dp)
+{
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ mutex_lock(&dev_priv->psr.lock);
+ if (!dev_priv->psr.enabled) {
+ mutex_unlock(&dev_priv->psr.lock);
+ return;
+ }
+
+ if (HAS_DDI(dev))
+ hsw_edp_psr_disable(intel_dp);
+ else
+ vlv_edp_psr_disable(intel_dp);
dev_priv->psr.enabled = NULL;
mutex_unlock(&dev_priv->psr.lock);
--
1.9.3
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
