On 1/13/2025 4:19 PM, Nemesa Garg wrote:
Load the lut values during pipe enable.
v2: Add the display version check
v3: Fix build issue
v4: Rebase
Signed-off-by: Nemesa Garg <nemesa.g...@intel.com>
Reviewed-by: Naga Venkata Srikanth V <nagavenkata.srikant...@intel.com>
---
drivers/gpu/drm/i915/display/intel_crtc.c | 3 +++
drivers/gpu/drm/i915/display/intel_display.c | 6 ++++++
drivers/gpu/drm/i915/display/intel_display_types.h | 2 ++
drivers/gpu/drm/i915/display/skl_scaler.c | 14 +++++++++++++-
4 files changed, 24 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/display/intel_crtc.c
b/drivers/gpu/drm/i915/display/intel_crtc.c
index c910168602d2..f502530a98af 100644
--- a/drivers/gpu/drm/i915/display/intel_crtc.c
+++ b/drivers/gpu/drm/i915/display/intel_crtc.c
@@ -389,6 +389,9 @@ int intel_crtc_init(struct drm_i915_private *dev_priv, enum
pipe pipe)
drm_WARN_ON(&dev_priv->drm, drm_crtc_index(&crtc->base) != crtc->pipe);
+ if (DISPLAY_VER(dev_priv) >= 20)
use HAS_CASF macro
+ drm_crtc_create_sharpness_strength_property(&crtc->base);
+
return 0;
fail:
diff --git a/drivers/gpu/drm/i915/display/intel_display.c
b/drivers/gpu/drm/i915/display/intel_display.c
index 7ab885fad189..52e8b6c86347 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -1881,6 +1881,9 @@ static void hsw_crtc_enable(struct intel_atomic_state
*state,
intel_crtc_wait_for_next_vblank(wa_crtc);
}
}
+
+ if (new_crtc_state->hw.casf_params.strength_changed)
Where is the strength_changed set?
+ intel_filter_lut_load(crtc, new_crtc_state);
}
void ilk_pfit_disable(const struct intel_crtc_state *old_crtc_state)
@@ -7182,6 +7185,9 @@ static void intel_pre_update_crtc(struct
intel_atomic_state *state,
intel_vrr_set_transcoder_timings(new_crtc_state);
}
+ if (intel_casf_strength_changed(new_crtc_state, old_crtc_state))
+ intel_casf_enable(new_crtc_state);
When a user changes sharpness strength, there can be 3 transitions:
If transition from 0 to strength 'x'
Intel_casf_enable() -> Enable Sharpness: need to write all scaler
registers, Sharpness LUT values and Sharpness CTL etc.
Transition from x to y
intel_update_sharpness() -> Only update sharpness strength.
Transition from x to 0
intel_casf_disable() -> Disable Sharpness: disable scaler, sharpness ctl
etc.
+
intel_fbc_update(state, crtc);
drm_WARN_ON(&i915->drm, !intel_display_power_is_enabled(i915, POWER_DOMAIN_DC_OFF));
diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h
b/drivers/gpu/drm/i915/display/intel_display_types.h
index e5d28377bd0b..589596bfd8c3 100644
--- a/drivers/gpu/drm/i915/display/intel_display_types.h
+++ b/drivers/gpu/drm/i915/display/intel_display_types.h
@@ -940,6 +940,8 @@ struct intel_casf {
struct scaler_filter_coeff coeff[SCALER_FILTER_NUM_TAPS];
u8 win_size;
bool need_scaler;
+ bool strength_changed;
+ u8 strength;
};
void intel_io_mmio_fw_write(void *ctx, i915_reg_t reg, u32 val);
diff --git a/drivers/gpu/drm/i915/display/skl_scaler.c
b/drivers/gpu/drm/i915/display/skl_scaler.c
index 40584bc19dbb..60e2ec86ee90 100644
--- a/drivers/gpu/drm/i915/display/skl_scaler.c
+++ b/drivers/gpu/drm/i915/display/skl_scaler.c
@@ -9,6 +9,7 @@
#include "intel_display_trace.h"
#include "intel_display_types.h"
#include "intel_fb.h"
+#include "intel_casf_regs.h"
#include "skl_scaler.h"
#include "skl_universal_plane.h"
@@ -896,7 +897,7 @@ void skl_scaler_get_config(struct intel_crtc_state *crtc_state)
/* find scaler attached to this pipe */
for (i = 0; i < crtc->num_scalers; i++) {
- u32 ctl, pos, size;
+ u32 ctl, pos, size, sharp;
ctl = intel_de_read(display, SKL_PS_CTRL(crtc->pipe, i));
if ((ctl & (PS_SCALER_EN | PS_BINDING_MASK)) != (PS_SCALER_EN |
PS_BINDING_PIPE))
@@ -904,6 +905,17 @@ void skl_scaler_get_config(struct intel_crtc_state
*crtc_state)
id = i;
+ if (DISPLAY_VER(display) >= 20) {
Use HAS_CASF macro.
Also this should be checked only for second scaler ie. when id == 1.
+ sharp = intel_de_read(display,
SHARPNESS_CTL(crtc->pipe));
+ if (sharp & FILTER_EN) {
+ crtc_state->hw.casf_params.strength =
+ REG_FIELD_GET(FILTER_STRENGTH_MASK,
sharp) - 16;
strength is u16, perhaps need to check that the value read is greater
than equal to 16.
In such a case, print error and perhaps set strength to 0.
Regards,
Ankit
+ crtc_state->hw.casf_params.need_scaler = true;
+ crtc_state->hw.casf_params.win_size =
+ REG_FIELD_GET(FILTER_SIZE_MASK, sharp);
+ }
+ }
+
if (!crtc_state->hw.casf_params.need_scaler)
crtc_state->pch_pfit.enabled = true;
