On 1/13/2025 4:19 PM, Nemesa Garg wrote:
Write the scaler registers for sharpness.
Here you are enabling the scaler for sharpness, so subject name
configure the scaler doesnt seem right.
The configuring is done in Patch#4.
Signed-off-by: Nemesa Garg <nemesa.g...@intel.com>
---
drivers/gpu/drm/i915/display/intel_casf.c | 2 +
drivers/gpu/drm/i915/display/skl_scaler.c | 45 +++++++++++++++++++++++
drivers/gpu/drm/i915/display/skl_scaler.h | 1 +
3 files changed, 48 insertions(+)
diff --git a/drivers/gpu/drm/i915/display/intel_casf.c
b/drivers/gpu/drm/i915/display/intel_casf.c
index b507401457bf..773abaad74ca 100644
--- a/drivers/gpu/drm/i915/display/intel_casf.c
+++ b/drivers/gpu/drm/i915/display/intel_casf.c
@@ -97,6 +97,8 @@ static void intel_casf_write_coeff(struct intel_crtc_state
*crtc_state)
void intel_casf_enable(struct intel_crtc_state *crtc_state)
{
intel_casf_write_coeff(crtc_state);
+
+ skl_scaler_setup_casf(crtc_state);
}
static void convert_sharpness_coef_binary(struct scaler_filter_coeff *coeff,
diff --git a/drivers/gpu/drm/i915/display/skl_scaler.c
b/drivers/gpu/drm/i915/display/skl_scaler.c
index a11e09a15e23..0718210de910 100644
--- a/drivers/gpu/drm/i915/display/skl_scaler.c
+++ b/drivers/gpu/drm/i915/display/skl_scaler.c
@@ -132,6 +132,13 @@ static void skl_scaler_max_dst_size(struct intel_crtc
*crtc,
}
}
+#define SCALER_FILTER_SELECT \
+ (PS_FILTER_PROGRAMMED | \
+ PS_Y_VERT_FILTER_SELECT(1) | \
+ PS_Y_HORZ_FILTER_SELECT(0) | \
+ PS_UV_VERT_FILTER_SELECT(1) | \
+ PS_UV_HORZ_FILTER_SELECT(0))
+
static int
skl_update_scaler(struct intel_crtc_state *crtc_state, bool force_detach,
unsigned int scaler_user, int *scaler_id,
@@ -667,6 +674,44 @@ static void skl_scaler_setup_filter(struct intel_display
*display, enum pipe pip
}
}
+void skl_scaler_setup_casf(struct intel_crtc_state *crtc_state)
+{
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+ struct intel_display *display = to_intel_display(crtc);
+ struct drm_display_mode *adjusted_mode =
+ &crtc_state->hw.adjusted_mode;
+ struct intel_crtc_scaler_state *scaler_state =
+ &crtc_state->scaler_state;
+ struct drm_rect src, dest;
+ int id, width, height;
+ int x, y;
+ enum pipe pipe = crtc->pipe;
+ u32 ps_ctrl;
+
+ width = adjusted_mode->crtc_hdisplay;
+ height = adjusted_mode->crtc_vdisplay;
+
+ x = y = 0;
+ drm_rect_init(&dest, x, y, width, height);
+
+ width = drm_rect_width(&dest);
+ height = drm_rect_height(&dest);
+ id = scaler_state->scaler_id;
+
+ drm_rect_init(&src, 0, 0,
+ drm_rect_width(&crtc_state->pipe_src) << 16,
+ drm_rect_height(&crtc_state->pipe_src) << 16);
+
+ ps_ctrl = PS_SCALER_EN | PS_BINDING_PIPE |
scaler_state->scalers[id].mode |
+ SCALER_FILTER_SELECT;
+
+ intel_de_write_fw(display, SKL_PS_CTRL(pipe, id), ps_ctrl);
Should we not disable the SKL_PS_CTL when sharpness is disabled?
Regards,
Ankit
+ intel_de_write_fw(display, SKL_PS_WIN_POS(pipe, id),
+ PS_WIN_XPOS(x) | PS_WIN_YPOS(y));
+ intel_de_write_fw(display, SKL_PS_WIN_SZ(pipe, id),
+ PS_WIN_XSIZE(width) | PS_WIN_YSIZE(height));
+}
+
void skl_pfit_enable(const struct intel_crtc_state *crtc_state)
{
struct intel_display *display = to_intel_display(crtc_state);
diff --git a/drivers/gpu/drm/i915/display/skl_scaler.h
b/drivers/gpu/drm/i915/display/skl_scaler.h
index 4d2e2dbb1666..e1fe6a2d6c32 100644
--- a/drivers/gpu/drm/i915/display/skl_scaler.h
+++ b/drivers/gpu/drm/i915/display/skl_scaler.h
@@ -28,5 +28,6 @@ void skl_detach_scalers(const struct intel_crtc_state
*crtc_state);
void skl_scaler_disable(const struct intel_crtc_state *old_crtc_state);
void skl_scaler_get_config(struct intel_crtc_state *crtc_state);
+void skl_scaler_setup_casf(struct intel_crtc_state *crtc_state);
#endif
