> -----Original Message-----
> From: Intel-gfx <intel-gfx-boun...@lists.freedesktop.org> On Behalf Of Mika
> Kahola
> Sent: Thursday, April 20, 2023 6:11 PM
> To: intel-gfx@lists.freedesktop.org
> Subject: [Intel-gfx] [PATCH 06/13] drm/i915/mtl: For DP2.0 10G and 20G rates
> use MPLLA
>
> Use MPLLA for DP2.0 rates 20G and 20G, when ssc is enabled.
Need to fix a typo here. It will be 10G and 20G.
Regards,
Animesh
>
> Signed-off-by: Mika Kahola <mika.kah...@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_cx0_phy.c | 7 +++++--
> 1 file changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> index f7720acaf58c..4231ba98f075 100644
> --- a/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> +++ b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> @@ -2340,8 +2340,11 @@ static void intel_program_port_clock_ctl(struct
> intel_encoder *encoder,
> val |=
> XELPDP_DDI_CLOCK_SELECT(XELPDP_DDI_CLOCK_SELECT_MAXPCLK);
>
> /* TODO: HDMI FRL */
> - /* TODO: DP2.0 10G and 20G rates enable MPLLA*/
> - val |= crtc_state->cx0pll_state.ssc_enabled ?
> XELPDP_SSC_ENABLE_PLLB : 0;
> + /* DP2.0 10G and 20G rates enable MPLLA*/
> + if (crtc_state->port_clock == 1000000 || crtc_state->port_clock ==
> 2000000)
> + val |= crtc_state->cx0pll_state.ssc_enabled ?
> XELPDP_SSC_ENABLE_PLLA : 0;
> + else
> + val |= crtc_state->cx0pll_state.ssc_enabled ?
> XELPDP_SSC_ENABLE_PLLB : 0;
>
> intel_de_rmw(i915, XELPDP_PORT_CLOCK_CTL(encoder->port),
> XELPDP_LANE1_PHY_CLOCK_SELECT |
> XELPDP_FORWARD_CLOCK_UNGATE |
> --
> 2.34.1
