On Thu, Nov 07, 2013 at 11:05:40AM +0100, Daniel Vetter wrote:
> We have a per-pipe bit in the master irq control register, so use it.
> This allows us to drop the masks for aggregate interrupt bits and be a
> bit more explicit in the code. It also removes one indentation level.
>
> Signed-off-by: Daniel Vetter <daniel.vet...@ffwll.ch>
> ---
> drivers/gpu/drm/i915/i915_irq.c | 40 +++++++++++++++++++---------------------
> drivers/gpu/drm/i915/i915_reg.h | 5 +----
> 2 files changed, 20 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> index 54338cf72feb..c04fbbf0acf7 100644
> --- a/drivers/gpu/drm/i915/i915_irq.c
> +++ b/drivers/gpu/drm/i915/i915_irq.c
> @@ -1749,6 +1749,7 @@ static irqreturn_t gen8_irq_handler(int irq, void *arg)
> u32 master_ctl;
> irqreturn_t ret = IRQ_NONE;
> uint32_t tmp = 0;
> + enum pipe pipe;
>
> atomic_inc(&dev_priv->irq_received);
>
> @@ -1777,31 +1778,28 @@ static irqreturn_t gen8_irq_handler(int irq, void
> *arg)
> }
> }
>
> - if (master_ctl & GEN8_DE_IRQS) {
> - int de_ret = 0;
> - int pipe;
> - for_each_pipe(pipe) {
> - uint32_t pipe_iir;
> -
> - pipe_iir = I915_READ(GEN8_DE_PIPE_IIR(pipe));
> - if (pipe_iir & GEN8_PIPE_VBLANK)
> - drm_handle_vblank(dev, pipe);
> + for_each_pipe(pipe) {
> + uint32_t pipe_iir;
>
> - if (pipe_iir & GEN8_PIPE_FLIP_DONE) {
> - intel_prepare_page_flip(dev, pipe);
> - intel_finish_page_flip_plane(dev, pipe);
> - }
> + if (!(master_ctl & GEN8_DE_PIPE_IRQ(pipe)))
> + continue;
>
> - if (pipe_iir & GEN8_DE_PIPE_IRQ_ERRORS)
> - DRM_ERROR("Errors on pipe %c\n", 'A' + pipe);
> + pipe_iir = I915_READ(GEN8_DE_PIPE_IIR(pipe));
> + if (pipe_iir & GEN8_PIPE_VBLANK)
> + drm_handle_vblank(dev, pipe);
>
> - if (pipe_iir) {
> - de_ret++;
> - ret = IRQ_HANDLED;
> - I915_WRITE(GEN8_DE_PIPE_IIR(pipe), pipe_iir);
> - }
> + if (pipe_iir & GEN8_PIPE_FLIP_DONE) {
> + intel_prepare_page_flip(dev, pipe);
> + intel_finish_page_flip_plane(dev, pipe);
> }
> - if (!de_ret)
> +
> + if (pipe_iir & GEN8_DE_PIPE_IRQ_ERRORS)
> + DRM_ERROR("Errors on pipe %c\n", 'A' + pipe);
Could use pipe_name(). Otherwise looks good.
Reviewed-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
> +
> + if (pipe_iir) {
> + ret = IRQ_HANDLED;
> + I915_WRITE(GEN8_DE_PIPE_IIR(pipe), pipe_iir);
> + } else
> DRM_ERROR("The master control interrupt lied (DE
> PIPE)!\n");
> }
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 2b9e66c0c6cf..f150edaa64ca 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -4031,15 +4031,12 @@
> #define GEN8_DE_PIPE_C_IRQ (1<<18)
> #define GEN8_DE_PIPE_B_IRQ (1<<17)
> #define GEN8_DE_PIPE_A_IRQ (1<<16)
> +#define GEN8_DE_PIPE_IRQ(pipe) (1<<(16+pipe))
> #define GEN8_GT_VECS_IRQ (1<<6)
> #define GEN8_GT_VCS2_IRQ (1<<3)
> #define GEN8_GT_VCS1_IRQ (1<<2)
> #define GEN8_GT_BCS_IRQ (1<<1)
> #define GEN8_GT_RCS_IRQ (1<<0)
> -/* Lazy definition */
> -#define GEN8_GT_IRQS 0x000000ff
> -#define GEN8_DE_IRQS 0x01ff0000
> -#define GEN8_RSVD_IRQS 0xB700ff00
>
> #define GEN8_GT_ISR(which) (0x44300 + (0x10 * (which)))
> #define GEN8_GT_IMR(which) (0x44304 + (0x10 * (which)))
> --
> 1.8.4.rc3
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
