From: Ville Syrjälä <ville.syrj...@linux.intel.com>

All the ILK+ WM compute functions take the latency values in 0.1us
units. Add a few comments to remind people about that.

Signed-off-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
---
 drivers/gpu/drm/i915/intel_pm.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 5fe8c4e..51f445f 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -2108,6 +2108,7 @@ static uint32_t ilk_pipe_pixel_rate(struct drm_device 
*dev,
        return pixel_rate;
 }
 
+/* latency must be in 0.1us units. */
 static uint32_t ilk_wm_method1(uint32_t pixel_rate, uint8_t bytes_per_pixel,
                               uint32_t latency)
 {
@@ -2122,6 +2123,7 @@ static uint32_t ilk_wm_method1(uint32_t pixel_rate, 
uint8_t bytes_per_pixel,
        return ret;
 }
 
+/* latency must be in 0.1us units. */
 static uint32_t ilk_wm_method2(uint32_t pixel_rate, uint32_t pipe_htotal,
                               uint32_t horiz_pixels, uint8_t bytes_per_pixel,
                               uint32_t latency)
@@ -2185,7 +2187,10 @@ enum hsw_data_buf_partitioning {
        HSW_DATA_BUF_PART_5_6,
 };
 
-/* For both WM_PIPE and WM_LP. */
+/*
+ * For both WM_PIPE and WM_LP.
+ * mem_value must be in 0.1us units.
+ */
 static uint32_t ilk_compute_pri_wm(struct hsw_pipe_wm_parameters *params,
                                   uint32_t mem_value,
                                   bool is_lp)
@@ -2212,7 +2217,10 @@ static uint32_t ilk_compute_pri_wm(struct 
hsw_pipe_wm_parameters *params,
        return min(method1, method2);
 }
 
-/* For both WM_PIPE and WM_LP. */
+/*
+ * For both WM_PIPE and WM_LP.
+ * mem_value must be in 0.1us units.
+ */
 static uint32_t ilk_compute_spr_wm(struct hsw_pipe_wm_parameters *params,
                                   uint32_t mem_value)
 {
@@ -2232,7 +2240,10 @@ static uint32_t ilk_compute_spr_wm(struct 
hsw_pipe_wm_parameters *params,
        return min(method1, method2);
 }
 
-/* For both WM_PIPE and WM_LP. */
+/*
+ * For both WM_PIPE and WM_LP.
+ * mem_value must be in 0.1us units.
+ */
 static uint32_t ilk_compute_cur_wm(struct hsw_pipe_wm_parameters *params,
                                   uint32_t mem_value)
 {
-- 
1.8.1.5

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to