On Tue, Sep 22, 2020 at 10:46:52PM -0700, Navare, Manasi wrote:
> On Thu, Sep 17, 2020 at 03:20:46PM +0300, Ville Syrjälä wrote:
> > On Tue, Sep 15, 2020 at 04:03:45PM -0700, Navare, Manasi wrote:
> > > On Mon, Sep 14, 2020 at 10:47:56PM +0300, Ville Syrjälä wrote:
> > > > On Mon, Sep 14, 2020 at 12:38:57PM -0700, Navare, Manasi wrote:
> > > > > On Mon, Sep 14, 2020 at 10:17:57PM +0300, Ville Syrjälä wrote:
> > > > > > On Mon, Sep 14, 2020 at 12:00:33PM -0700, Navare, Manasi wrote:
> > > > > > > On Mon, Sep 07, 2020 at 02:20:56PM +0300, Ville Syrjälä wrote:
> > > > > > > > On Wed, Jul 15, 2020 at 03:42:15PM -0700, Manasi Navare wrote:
> > > > > > > > > From: Maarten Lankhorst <maarten.lankho...@linux.intel.com>
> > > > > > > > >
> > > > > > > > > Small changes to intel_dp_mode_valid(), allow listing modes
> > > > > > > > > that
> > > > > > > > > can only be supported in the bigjoiner configuration, which is
> > > > > > > > > not supported yet.
> > > > > > > > >
> > > > > > > > > eDP does not support bigjoiner, so do not expose bigjoiner
> > > > > > > > > only
> > > > > > > > > modes on the eDP port.
> > > > > > > > >
> > > > > > > > > v5:
> > > > > > > > > * Increase max plane width to support 8K with bigjoiner
> > > > > > > > > (Maarten)
> > > > > > > > > v4:
> > > > > > > > > * Rebase (Manasi)
> > > > > > > > >
> > > > > > > > > Changes since v1:
> > > > > > > > > - Disallow bigjoiner on eDP.
> > > > > > > > > Changes since v2:
> > > > > > > > > - Rename intel_dp_downstream_max_dotclock to
> > > > > > > > > intel_dp_max_dotclock,
> > > > > > > > > and split off the downstream and source checking to its own
> > > > > > > > > function.
> > > > > > > > > (Ville)
> > > > > > > > > v3:
> > > > > > > > > * Rebase (Manasi)
> > > > > > > > >
> > > > > > > > > Signed-off-by: Manasi Navare <manasi.d.nav...@intel.com>
> > > > > > > > > Signed-off-by: Maarten Lankhorst
> > > > > > > > > <maarten.lankho...@linux.intel.com>
> > > > > > > > > ---
> > > > > > > > > drivers/gpu/drm/i915/display/intel_display.c | 2 +-
> > > > > > > > > drivers/gpu/drm/i915/display/intel_dp.c | 119
> > > > > > > > > ++++++++++++++-----
> > > > > > > > > 2 files changed, 91 insertions(+), 30 deletions(-)
> > > > > > > > >
> > > > > > > > > diff --git a/drivers/gpu/drm/i915/display/intel_display.c
> > > > > > > > > b/drivers/gpu/drm/i915/display/intel_display.c
> > > > > > > > > index 78cbfefbfa62..3ecb642805a6 100644
> > > > > > > > > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > > > > > > > > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > > > > > > > > @@ -17400,7 +17400,7 @@
> > > > > > > > > intel_mode_valid_max_plane_size(struct drm_i915_private
> > > > > > > > > *dev_priv,
> > > > > > > > > * too big for that.
> > > > > > > > > */
> > > > > > > > > if (INTEL_GEN(dev_priv) >= 11) {
> > > > > > > > > - plane_width_max = 5120;
> > > > > > > > > + plane_width_max = 7680;
> > > > > > > >
> > > > > > > > This looks misplaced. Planes do no know whether bigjoiner can
> > > > > > > > be used or
> > > > > > > > not. They should not care in fact. The caller should have that
> > > > > > > > knowledge
> > > > > > > > and can deal with it properly.
> > > > > > >
> > > > > > > Hmm, so the caller of intel_mode_valid_max_plane_size() should
> > > > > > > check on the bigjoiner
> > > > > > > flag and perhaps if bigjoiner is true then increase the
> > > > > > > plane_width_max to 7680?
> > > > > > >
> > > > > > > Am still not sure where this should happen? We need to have the
> > > > > > > plane max width to be 7680
> > > > > > > before we prune the 8K mode in intel_mode_valid
> > > > > > >
> > > > > > > Where should this be added according to you?
> > > > > >
> > > > > > Hmm. I guess we do need to put it into this function given the way
> > > > > > this
> > > > > > is structured. However we still can't assume bigjoiner can be used
> > > > > > since
> > > > > > it can't be used on DDI A on icl. So we should probably just pass
> > > > > > in a
> > > > > > bool here to indicate whether bigjoiner can be used or not.
> > > > > >
> > > > >
> > > > > So in intel_dp_mode_valid() we set bigjoiner = true if not edp and
> > > > > higher clock.
> > > > > I think here we need to do the platform check also, 1. because now we
> > > > > are enabling this for TGL+
> > > > > where big joiner on all pipes. But we should still I think add GEN
> > > > > >=12 check before setting bigjoiner
> > > > > to true in intel_dp_mode_valid() and then pass that to
> > > > > intel_mode_valid_max_plane_size(..., book bigjoiner)
> > > >
> > > > can_bigjoiner() {
> > > > return gen >= 12 || (gen==11 && port!=A);
>
> On Gen 11, Port A is eDP or MIPI DSI so I could check:
>
> can_bigjoiner()
> {
> return gen >=12 || (gen == 11 && !intel_dp_is_edp())
> }
>
> The above should be okay right?
No. Check for port A.
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
