On Mon, Sep 07, 2020 at 02:20:56PM +0300, Ville Syrjälä wrote:
> On Wed, Jul 15, 2020 at 03:42:15PM -0700, Manasi Navare wrote:
> > From: Maarten Lankhorst <maarten.lankho...@linux.intel.com>
> >
> > Small changes to intel_dp_mode_valid(), allow listing modes that
> > can only be supported in the bigjoiner configuration, which is
> > not supported yet.
> >
> > eDP does not support bigjoiner, so do not expose bigjoiner only
> > modes on the eDP port.
> >
> > v5:
> > * Increase max plane width to support 8K with bigjoiner (Maarten)
> > v4:
> > * Rebase (Manasi)
> >
> > Changes since v1:
> > - Disallow bigjoiner on eDP.
> > Changes since v2:
> > - Rename intel_dp_downstream_max_dotclock to intel_dp_max_dotclock,
> > and split off the downstream and source checking to its own function.
> > (Ville)
> > v3:
> > * Rebase (Manasi)
> >
> > Signed-off-by: Manasi Navare <manasi.d.nav...@intel.com>
> > Signed-off-by: Maarten Lankhorst <maarten.lankho...@linux.intel.com>
> > ---
> > drivers/gpu/drm/i915/display/intel_display.c | 2 +-
> > drivers/gpu/drm/i915/display/intel_dp.c | 119 ++++++++++++++-----
> > 2 files changed, 91 insertions(+), 30 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.c
> > b/drivers/gpu/drm/i915/display/intel_display.c
> > index 78cbfefbfa62..3ecb642805a6 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > @@ -17400,7 +17400,7 @@ intel_mode_valid_max_plane_size(struct
> > drm_i915_private *dev_priv,
> > * too big for that.
> > */
> > if (INTEL_GEN(dev_priv) >= 11) {
> > - plane_width_max = 5120;
> > + plane_width_max = 7680;
>
> This looks misplaced. Planes do no know whether bigjoiner can be used or
> not. They should not care in fact. The caller should have that knowledge
> and can deal with it properly.
Hmm, so the caller of intel_mode_valid_max_plane_size() should check on the
bigjoiner
flag and perhaps if bigjoiner is true then increase the plane_width_max to 7680?
Am still not sure where this should happen? We need to have the plane max width
to be 7680
before we prune the 8K mode in intel_mode_valid
Where should this be added according to you?
Manasi
>
> > plane_height_max = 4320;
> > } else {
> > plane_width_max = 5120;
> > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
> > b/drivers/gpu/drm/i915/display/intel_dp.c
> > index d6295eb20b63..fbfea99fd804 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> > @@ -248,25 +248,37 @@ intel_dp_max_data_rate(int max_link_clock, int
> > max_lanes)
> > return max_link_clock * max_lanes;
> > }
> >
> > -static int
> > -intel_dp_downstream_max_dotclock(struct intel_dp *intel_dp)
> > +static int source_max_dotclock(struct intel_dp *intel_dp, bool
> > allow_bigjoiner)
> > {
> > - struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
> > - struct intel_encoder *encoder = &dig_port->base;
> > + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> > + struct intel_encoder *encoder = &intel_dig_port->base;
> > struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> > - int max_dotclk = dev_priv->max_dotclk_freq;
> > - int ds_max_dotclk;
> >
> > + if (allow_bigjoiner && INTEL_GEN(dev_priv) >= 11 &&
> > !intel_dp_is_edp(intel_dp))
> > + return 2 * dev_priv->max_dotclk_freq;
> > +
> > + return dev_priv->max_dotclk_freq;
> > +}
> > +
> > +static int downstream_max_dotclock(struct intel_dp *intel_dp)
> > +{
> > int type = intel_dp->downstream_ports[0] & DP_DS_PORT_TYPE_MASK;
> >
> > if (type != DP_DS_PORT_TYPE_VGA)
> > - return max_dotclk;
> > + return 0;
> >
> > - ds_max_dotclk = drm_dp_downstream_max_clock(intel_dp->dpcd,
> > - intel_dp->downstream_ports);
> > + return drm_dp_downstream_max_clock(intel_dp->dpcd,
> > + intel_dp->downstream_ports);
> > +}
> > +
> > +static int
> > +intel_dp_max_dotclock(struct intel_dp *intel_dp, bool allow_bigjoiner)
> > +{
> > + int max_dotclk = source_max_dotclock(intel_dp, allow_bigjoiner);
> > + int ds_max_dotclk = downstream_max_dotclock(intel_dp);
> >
> > if (ds_max_dotclk != 0)
> > - max_dotclk = min(max_dotclk, ds_max_dotclk);
> > + return min(max_dotclk, ds_max_dotclk);
> >
> > return max_dotclk;
> > }
> > @@ -527,7 +539,8 @@ small_joiner_ram_size_bits(struct drm_i915_private
> > *i915)
> >
> > static u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
> > u32 link_clock, u32 lane_count,
> > - u32 mode_clock, u32 mode_hdisplay)
> > + u32 mode_clock, u32 mode_hdisplay,
> > + bool bigjoiner)
> > {
> > u32 bits_per_pixel, max_bpp_small_joiner_ram;
> > int i;
> > @@ -545,6 +558,10 @@ static u16 intel_dp_dsc_get_output_bpp(struct
> > drm_i915_private *i915,
> > /* Small Joiner Check: output bpp <= joiner RAM (bits) / Horiz. width */
> > max_bpp_small_joiner_ram = small_joiner_ram_size_bits(i915) /
> > mode_hdisplay;
> > +
> > + if (bigjoiner)
> > + max_bpp_small_joiner_ram *= 2;
> > +
> > drm_dbg_kms(&i915->drm, "Max small joiner bpp: %u\n",
> > max_bpp_small_joiner_ram);
> >
> > @@ -554,6 +571,15 @@ static u16 intel_dp_dsc_get_output_bpp(struct
> > drm_i915_private *i915,
> > */
> > bits_per_pixel = min(bits_per_pixel, max_bpp_small_joiner_ram);
> >
> > + if (bigjoiner) {
> > + u32 max_bpp_bigjoiner =
> > + i915->max_cdclk_freq * 48 /
> > + intel_dp_mode_to_fec_clock(mode_clock);
> > +
> > + DRM_DEBUG_KMS("Max big joiner bpp: %u\n", max_bpp_bigjoiner);
> > + bits_per_pixel = min(bits_per_pixel, max_bpp_bigjoiner);
> > + }
> > +
> > /* Error out if the max bpp is less than smallest allowed valid bpp */
> > if (bits_per_pixel < valid_dsc_bpp[0]) {
> > drm_dbg_kms(&i915->drm, "Unsupported BPP %u, min %u\n",
> > @@ -576,7 +602,8 @@ static u16 intel_dp_dsc_get_output_bpp(struct
> > drm_i915_private *i915,
> > }
> >
> > static u8 intel_dp_dsc_get_slice_count(struct intel_dp *intel_dp,
> > - int mode_clock, int mode_hdisplay)
> > + int mode_clock, int mode_hdisplay,
> > + bool bigjoiner)
> > {
> > struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> > u8 min_slice_count, i;
> > @@ -603,12 +630,20 @@ static u8 intel_dp_dsc_get_slice_count(struct
> > intel_dp *intel_dp,
> >
> > /* Find the closest match to the valid slice count values */
> > for (i = 0; i < ARRAY_SIZE(valid_dsc_slicecount); i++) {
> > - if (valid_dsc_slicecount[i] >
> > - drm_dp_dsc_sink_max_slice_count(intel_dp->dsc_dpcd,
> > - false))
> > + u8 test_slice_count = bigjoiner ?
> > + 2 * valid_dsc_slicecount[i] :
> > + valid_dsc_slicecount[i];
> > +
> > + if (test_slice_count >
> > + drm_dp_dsc_sink_max_slice_count(intel_dp->dsc_dpcd, false))
> > break;
> > - if (min_slice_count <= valid_dsc_slicecount[i])
> > - return valid_dsc_slicecount[i];
> > +
> > + /* big joiner needs small joiner to be enabled */
> > + if (bigjoiner && test_slice_count < 4)
> > + continue;
> > +
> > + if (min_slice_count <= test_slice_count)
> > + return test_slice_count;
> > }
> >
> > drm_dbg_kms(&i915->drm, "Unsupported Slice Count %d\n",
> > @@ -648,11 +683,15 @@ intel_dp_mode_valid(struct drm_connector *connector,
> > int max_dotclk;
> > u16 dsc_max_output_bpp = 0;
> > u8 dsc_slice_count = 0;
> > + bool dsc = false, bigjoiner = false;
> >
> > if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
> > return MODE_NO_DBLESCAN;
> >
> > - max_dotclk = intel_dp_downstream_max_dotclock(intel_dp);
> > + if (mode->flags & DRM_MODE_FLAG_DBLCLK)
> > + return MODE_H_ILLEGAL;
> > +
> > + max_dotclk = intel_dp_max_dotclock(intel_dp, false);
> >
> > if (intel_dp_is_edp(intel_dp) && fixed_mode) {
> > if (mode->hdisplay > fixed_mode->hdisplay)
> > @@ -664,6 +703,21 @@ intel_dp_mode_valid(struct drm_connector *connector,
> > target_clock = fixed_mode->clock;
> > }
> >
> > + if (mode->clock < 10000)
> > + return MODE_CLOCK_LOW;
> > +
> > + if (target_clock > max_dotclk) {
> > + if (intel_dp_is_edp(intel_dp))
> > + return MODE_CLOCK_HIGH;
> > +
> > + max_dotclk = intel_dp_max_dotclock(intel_dp, true);
> > +
> > + if (target_clock > max_dotclk)
> > + return MODE_CLOCK_HIGH;
> > +
> > + bigjoiner = true;
> > + }
> > +
> > max_link_clock = intel_dp_max_link_rate(intel_dp);
> > max_lanes = intel_dp_max_lane_count(intel_dp);
> >
> > @@ -691,23 +745,28 @@ intel_dp_mode_valid(struct drm_connector *connector,
> > max_link_clock,
> > max_lanes,
> > target_clock,
> > - mode->hdisplay) >>
> > 4;
> > + mode->hdisplay,
> > + bigjoiner) >> 4;
> > dsc_slice_count =
> > intel_dp_dsc_get_slice_count(intel_dp,
> > target_clock,
> > - mode->hdisplay);
> > + mode->hdisplay,
> > + bigjoiner);
> > }
> > +
> > + dsc = dsc_max_output_bpp && dsc_slice_count;
> > }
> >
> > - if ((mode_rate > max_rate && !(dsc_max_output_bpp && dsc_slice_count))
> > ||
> > - target_clock > max_dotclk)
> > + /* big joiner configuration needs DSC */
> > + if (bigjoiner && !dsc) {
> > + DRM_DEBUG_KMS("Link clock needs bigjoiner, but DSC or FEC not
> > available\n");
> > return MODE_CLOCK_HIGH;
> > + }
> >
> > - if (mode->clock < 10000)
> > - return MODE_CLOCK_LOW;
> > -
> > - if (mode->flags & DRM_MODE_FLAG_DBLCLK)
> > - return MODE_H_ILLEGAL;
> > + if (mode_rate > max_rate && !dsc) {
> > + DRM_DEBUG_KMS("Cannot drive without DSC\n");
> > + return MODE_CLOCK_HIGH;
> > + }
> >
> > return intel_mode_valid_max_plane_size(dev_priv, mode);
> > }
> > @@ -2204,11 +2263,13 @@ static int intel_dp_dsc_compute_config(struct
> > intel_dp *intel_dp,
> > pipe_config->port_clock,
> > pipe_config->lane_count,
> > adjusted_mode->crtc_clock,
> > -
> > adjusted_mode->crtc_hdisplay);
> > +
> > adjusted_mode->crtc_hdisplay,
> > + false);
> > dsc_dp_slice_count =
> > intel_dp_dsc_get_slice_count(intel_dp,
> > adjusted_mode->crtc_clock,
> > -
> > adjusted_mode->crtc_hdisplay);
> > +
> > adjusted_mode->crtc_hdisplay,
> > + false);
> > if (!dsc_max_output_bpp || !dsc_dp_slice_count) {
> > drm_dbg_kms(&dev_priv->drm,
> > "Compressed BPP/Slice Count not
> > supported\n");
> > --
> > 2.19.1
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
> --
> Ville Syrjälä
> Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
