On Thu, Aug 29, 2019 at 02:25:50AM -0700, Lucas De Marchi wrote:
> DP_TP_{CTL,STATUS} should only be programmed when the encoder is intel_dp.
> Checking its current usages intel_disable_ddi_buf() is the only
> offender, with other places being protected by checks like
> pipe_config->fec_enable that is only set by intel_dp.
>
> Cc: Ville Syrjälä <ville.syrj...@linux.intel.com>
> Signed-off-by: Lucas De Marchi <lucas.demar...@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_ddi.c | 10 ++++++----
> 1 file changed, 6 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c
> b/drivers/gpu/drm/i915/display/intel_ddi.c
> index 3180dacb5be4..df3e4fe7e3e9 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> @@ -3462,10 +3462,12 @@ static void intel_disable_ddi_buf(struct
> intel_encoder *encoder,
> wait = true;
> }
>
> - val = I915_READ(DP_TP_CTL(port));
> - val &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK);
> - val |= DP_TP_CTL_LINK_TRAIN_PAT1;
> - I915_WRITE(DP_TP_CTL(port), val);
> + if (intel_encoder_is_dp(encoder)) {
Doesn't really make sense to me. Either we just do it (because a DDI is
just a DDI so DP_TP_CTL does exist always), or we only do it when driving
DP and not when driving HDMI.
For the latter I would perhaps suggest moving all this extra junk out
from intel_disable_ddi_buf() into the DP specific code paths, leaving
just the actual DDI_BUF_CTL disable here.
> + val = I915_READ(DP_TP_CTL(port));
> + val &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK);
> + val |= DP_TP_CTL_LINK_TRAIN_PAT1;
> + I915_WRITE(DP_TP_CTL(port), val);
> + }
>
> /* Disable FEC in DP Sink */
> intel_ddi_disable_fec_state(encoder, crtc_state);
> --
> 2.23.0
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
